> Sent: Sunday, November 04, 2018 at 12:02 PM
> From: "Wayne Blaszczyk" <[email protected]>
> To: "BLFS Support List" <[email protected]>
> Cc: "Christopher Gregory" <[email protected]>
> Subject: Re: [blfs-support] cups-filters-1.21.1 with Poppler-0.69.0 does not 
> build
>
> On Sat, 2018-11-03 at 13:27 +0100, Christopher Gregory via blfs-support wrote:
> > Hello,
> > 
> > I am going through another complete build on a new ssd drive and found an 
> > issue with building cups-filters against Poppler-0.69.0.  I do not have the 
> > exact error anymore, as I remembered that I had
> > an
> > issue with an earlier build, and an earlier version of cups-filters and 
> > Poppler-0.67.0, that required a small patch from the developers to build.
> > 
> > I downgraded to Poppler-0.67.0 on this current build and was successfully 
> > able to build and install cups-filters-1.21.1 without any patches needed.
> > 
> > The issue with the no-build also occurs on the latest version of poppler, 
> > though it is a completely different error from the one needing the patch.
> > 
> > Perhaps someone else can attempt to build the current book version of 
> > Poppler and cups-filters-1.21.1 and see if it builds for them, and if not, 
> > is there a solution to this new error, as I sure have
> > not
> > been able to find it.
> > 
> > Regards,
> > 
> > Christopher.
> 
> The attached patch is what I use in my build.cups-filters-1.21.3
> See 
> https://github.com/OpenPrinting/cups-filters/commit/6b0747c1630dd973acd138f927dbded4ea45e360
> 
> Regards,
> Wayne.
> 
> 

Hello Wayne,

Thanks for the patch it does indeed make both cups-filters-1.21.3 compile and 
install against Poppler-0.69.0.

I first applied the patch to cups-filters-1.21.3 and tested the build against 
Poppler-0.71.0, which is now the newest upstream, and guess what?  yet another 
patch is going to be required!!! as it does not
build.

Regards,

Christopher.
-- 
http://lists.linuxfromscratch.org/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page

Reply via email to