Hi Steve, If you are already accustomed to Sound Forge, and it does what you need it to, then you should stick with it. It should be better than GoldWave. HTH, Richard Justice www.blind-computing.com ----- Original Message ----- From: "Steve Boodram" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, June 29, 2007 10:28 PM Subject: Re: [Blind-Computing] Transferring Cassette To PC Question
Hi, is gold wave easier to use than sound Forge. I use sound Forge for recording all my tapes and it works well for me, but if Gold wave is much more simple and has more feature i"me willing to give it a try. Any suggestions or comments please? Phone: 1-868-636-3519 Fax: 1-868-679-1001 Mobile: 1-868-730-8377 e-mail: [EMAIL PROTECTED] ----- Original Message ----- From: "Lennie Rinaldi" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, June 29, 2007 11:03 AM Subject: Re: [Blind-Computing] Transferring Cassette To PC Question > Hello David and Rick, > > I would like to add another thing about recording tapes and records to the PC. > > I have done a lot of recordings of my record albums and done one from > my tape deck with another software called Dart XP. It is accessible > with Jaws except for editing. I don't recommend it because it is more > expensive and hard to use. That's why I prefer GoldWave. > > I am still in the process of learning to record with GoldWave, but I > want to point out one important fact about recording music which was > not mentioned here. > > You will have to set up the proper volume level for recording > otherwise you may end up with distortion in the final output. I have > not heard any tutorial on how to set up the recording level with > GoldWave. The developer of GoldWave (Chris) has replied to my > numerous questions on how to do this correctly. It is sort of time > consuming and tedious. I in no way trying to discourage anybody from > doing this. > > As soon as I can get a handle on the proper procedure to set up the > volume level, I will share it with the group. > > I will follow up with another Email to the list some of the > information that I received from Chris later today. > > Just trying to help. > > Lennie > > At 09:02 AM 6/29/2007, you wrote: > >Rick is correct about the special cable to use if recording off a direct > >sound out put such as an ear phone jack. I didn't think to mention that > >since I have never done it that way at all but I do know some folks who do. > >Now that will work for simple voice where sound quality isn't a premium, but > >for music you must be very careful as it has a tendency to mess up the final > >product. Just my opinion on that last of course, some people like recording > >that way. Myself I always record from the jacks in the rear of a tape deck > >that are normally designed to feed a stereo amplifier. Those jacks will feed > >a computer's sound card perfectly just like they do a home stereo system. As > >always if there's anything else just give a yell, interestingly enough > >although I haven't done this for a while I did do some recording yesterday > >using the method I've previously outlined. > >David Ferrin [EMAIL PROTECTED] > >----- Original Message ----- > >From: "Ricque" <[EMAIL PROTECTED]> > >To: <[email protected]> > >Sent: Friday, June 29, 2007 8:32 AM > >Subject: Re: [Blind-Computing] Transferring Cassette To PC Question > > > > > >Hi Larry, > >If you are recording directly from a source that is normally controlled by > >an amplifier, > >then you would need the atenuated patch cord to keep from overdriving the > >soundcard. > >An example of this could be a direct audio output from a VCR, or stand-alone > >cassette deck. > >This is usually not a problem with portable cassette recorder/players. > >Just make sure that you match the cable to the type of player, i e, mono for > >mono, and stereo for stereo. > >Example: > >If you are recording from a stereo player, and you use a mono cable, you > >will only be getting one channel. > >As David has mentioned, how and what you intend to record will determine > >the software required for the job. > >Example: > >If you are going to recordan NLS tape for instance, there are two ways of > >doing this. > >1. If you are going to record from a 4-track player such as those used for > >Talking Books, > >a simple audio recording program will do, > >but you will need to record each track as if you wer listening to the tape. > >2. If you want to play the tape as a 2 track tape in the same recorder, > >or use another 2-track recorder, then you would use a program such as > >GoldWave to seperate, and reverse the tracks. > >Something worth mentioning here, if you are recording in mono such as > >lectures or someone just reading a book, then you do not need to record in > >stereo, and you should use a reduced sample rate, to minimize the size of > >the file. > >David can comment further on this as he has more experience with it than I. > >I would recommend listening to the audio tutorials for GoldWave on the audio > >page at: > >www.blind-computing.com > >These are very good tutorials and easy to follow. > >If you need more help, let us know. > >HTH, > >Richard Justice > >www.blind-computing.com > >----- Original Message ----- > >From: "Larry Stansifer" <[EMAIL PROTECTED]> > >To: <[email protected]> > >Sent: Friday, June 29, 2007 7:30 AM > >Subject: Re: [Blind-Computing] Transferring Cassette To PC Question > > > > > >Rick, > > > >How do I determine if I need an attenuated patch cable? > > > >Regards > > > >Larry Stansifer > > > >Keep your friends close and your enemies closer. > > > >Sun Tzu. > > > > > >-----Original Message----- > >From: [EMAIL PROTECTED] > >[mailto:[EMAIL PROTECTED] On Behalf Of > >Ricque > >Sent: Thursday, June 28, 2007 6:32 PM > >To: [email protected] > >Subject: Re: [Blind-Computing] Transferring Cassette To PC > >Question > > > > > >Hi Donnie, > >Yes, it is possible. > >You need a cassette recorder that will accomodate the type > >of cassette, i e, > >2 track or 4 track. > >You will need a patch cable from the player/recorder to your > >sound card on > >your computer. > >You can pickup one of these at somewhere like Radio Shack, > >and depending on > >your particular equipment, > >it may need to be an atenuated patch cord to avoid > >overdriving the > >soundcard > >And last but not least, you will need recording software > >such as GoldWave, > >for the recording, and plenty of hard drive space. > >HTH, > >Richard Justice > >www.blind-computing.com > >----- Original Message ----- > >From: "Donnie Parrett" <[EMAIL PROTECTED]> > >To: "Blind-Computing" <[email protected]> > >Sent: Thursday, June 28, 2007 3:02 PM > >Subject: [Blind-Computing] Transferring Cassette To PC > >Question > > > > > >Is it possible to transfer a cassette tape from a regular > >cassette tape > >recorder to my computer? If > >so, what all do I need and how do I do it? > > > >Contact me at: > >Donnie Parrett > >1956 Asa Flat Road > >Annville, KY 40402 > >Home # 606-364-3321 > >Cell # 606-438-2557 > >Church # 606-364-PRAY > >Skype Name: Donnie1261 > >Email: [EMAIL PROTECTED] > > > > > >Visit the Blind Computing List home page at: > >http://www.blind-computing.com Address for the list > >archives: > >http://www.mail-archive.com/[email protected]/ > >To post to this group, send email to > >[email protected] To unsubscribe from this > >group, send an email to [EMAIL PROTECTED] > >For help from Mailman with your account Put the word help in > >the subject or > >body of a blank message to: > >[EMAIL PROTECTED] > >Use the following form in order to contact the management > >team http://www.blind-computing.com/contact.php > >If you wish to join the JAWS Users List send a blank email > >to the following > >address: > >[EMAIL PROTECTED] > > > > > >Visit the Blind Computing List home page at: > >http://www.blind-computing.com Address for the list > >archives: > >http://www.mail-archive.com/[email protected]/ > >To post to this group, send email to > >[email protected] To unsubscribe from this > >group, send an email to [EMAIL PROTECTED] > >For help from Mailman with your account Put the word help in > >the subject or body of a blank message to: > >[EMAIL PROTECTED] > >Use the following form in order to contact the management > >team http://www.blind-computing.com/contact.php > >If you wish to join the JAWS Users List send a blank email > >to the following address: > >[EMAIL PROTECTED] > > > > > >-- > >BEGIN-ANTISPAM-VOTING-LINKS > >------------------------------------------------------ > > > >Teach Infowest Spam Trap if this mail (ID 103881142) is > >spam: > >Spam: > >https://spamtrap.infowest.com/canit/b.php?i=103881142&m=c3a1 > >dd58b58f&c=s > >Not spam: > >https://spamtrap.infowest.com/canit/b.php?i=103881142&m=c3a1 > >dd58b58f&c=n > >Forget vote: > >https://spamtrap.infowest.com/canit/b.php?i=103881142&m=c3a1 > >dd58b58f&c=f > >------------------------------------------------------ > >END-ANTISPAM-VOTING-LINKS > > > > > >Visit the Blind Computing List home page at: > >http://www.blind-computing.com > >Address for the list archives: > >http://www.mail-archive.com/[email protected]/ > >To post to this group, send email to > >[email protected] > >To unsubscribe from this group, send an email to > >[EMAIL PROTECTED] > >For help from Mailman with your account Put the word help in the subject or > >body of a blank message to: > >[EMAIL PROTECTED] > >Use the following form in order to contact the management team > >http://www.blind-computing.com/contact.php > >If you wish to join the JAWS Users List send a blank email to the following > >address: > >[EMAIL PROTECTED] > > > > > >Visit the Blind Computing List home page at: > >http://www.blind-computing.com > >Address for the list archives: > >http://www.mail-archive.com/[email protected]/ > >To post to this group, send email to > >[email protected] > >To unsubscribe from this group, send an email to > >[EMAIL PROTECTED] > >For help from Mailman with your account Put the word help in the subject or > >body of a blank message to: > >[EMAIL PROTECTED] > >Use the following form in order to contact the management team > >http://www.blind-computing.com/contact.php > >If you wish to join the JAWS Users List send a blank email to the following > >address: > >[EMAIL PROTECTED] > > > > > >Visit the Blind Computing List home page at: > >http://www.blind-computing.com > >Address for the list archives: > >http://www.mail-archive.com/[email protected]/ > >To post to this group, send email to > >[email protected] > >To unsubscribe from this group, send an email to > >[EMAIL PROTECTED] > >For help from Mailman with your account Put the word help in the > >subject or body of a blank message to: > >[EMAIL PROTECTED] > >Use the following form in order to contact the management team > >http://www.blind-computing.com/contact.php > >If you wish to join the JAWS Users List send a blank email to the > >following address: > >[EMAIL PROTECTED] > > > > Visit the Blind Computing List home page at: > http://www.blind-computing.com > Address for the list archives: > http://www.mail-archive.com/[email protected]/ > To post to this group, send email to > [email protected] > To unsubscribe from this group, send an email to > [EMAIL PROTECTED] > For help from Mailman with your account Put the word help in the subject or body of a blank message to: > [EMAIL PROTECTED] > Use the following form in order to contact the management team > http://www.blind-computing.com/contact.php > If you wish to join the JAWS Users List send a blank email to the following address: > [EMAIL PROTECTED] Visit the Blind Computing List home page at: http://www.blind-computing.com Address for the list archives: http://www.mail-archive.com/[email protected]/ To post to this group, send email to [email protected] To unsubscribe from this group, send an email to [EMAIL PROTECTED] For help from Mailman with your account Put the word help in the subject or body of a blank message to: [EMAIL PROTECTED] Use the following form in order to contact the management team http://www.blind-computing.com/contact.php If you wish to join the JAWS Users List send a blank email to the following address: [EMAIL PROTECTED] Visit the Blind Computing List home page at: http://www.blind-computing.com Address for the list archives: http://www.mail-archive.com/[email protected]/ To post to this group, send email to [email protected] To unsubscribe from this group, send an email to [EMAIL PROTECTED] For help from Mailman with your account Put the word help in the subject or body of a blank message to: [EMAIL PROTECTED] Use the following form in order to contact the management team http://www.blind-computing.com/contact.php If you wish to join the JAWS Users List send a blank email to the following address: [EMAIL PROTECTED]
