Something to bear in mind is that I am told that with ink jet printers and some cheaper thinner paper double sided or duplex printing may be problematic as the ink can show through from one side of the page to the other, giving a messy result with some printers when printing duplex output . Having thicker higher quality paper can resolve this.
Anyway in Word 2003 you will have to do something like the following. I have not done this so I should try a short document first to experiment with. Someone else may have the answer definitely. First of all you should check that your printer driver does not have a setting or wizard to walk you through this process. I would check this by going to the print dialogue box and tabbing to options and see what is there. Assuming that nothing is there to help you I would do the following. In the print dialogue box tab until you hear print all pages in range combo box. Cursor down to select odd pages and print the job. Now you have to reinsert the paper go back to the print dialogue box and change the settings to print even pages. You should then use a sighted person to see if this has worked ok or if none are around scan the what you have printed to check this has worked ok. What you will have to learn by experimentation is what direction to reinsert the paper to achieve the desired results. Hopefully you will not have to reorder the pages but again as I have not done this you will have to experiment with a short document to find out. Personally I would get a duplex printer if I wanted to do a lot of double sided printing. Regards David Griffith -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, 11 January 2008 06:04 To: [email protected] Subject: Re: [Blind-Computing] Re printing on two sides of the page Hi Do you have any advice on how to go about doing the double sided printing? God bless, Mark Torgerson God loves you! My ham radio lists. http://lists.topica.com/lists/funhamradio. http://groups.google.com/group/funhamradio-list MSS and MSP scripting list http://groups.google.com:80/group/msscripting?hl=en ----- Original Message ----- From: "Thomas j Vos" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, January 10, 2008 1:22 PM Subject: [Blind-Computing] Re printing on two sides of the page >I routinely do this with my printer,s and have no problem > But give it a try and have someone look at it for you, if you can't see > it well enough yourself. > Blessings, > Tom > > Visit the JAWS Users List home page at: > http://www.jaws-users.com > Address for the list archives: > http://www.mail-archive.com/[email protected]/ > To post to this group, send email to > [email protected] > To unsubscribe from this group, send an email to > [EMAIL PROTECTED] > For help from Mailman with your account Put the word help in the subject > or body of a blank message to: > [EMAIL PROTECTED] > Use the following form in order to contact the management team > http://www.jaws-users.com/BlindComputing.php > If you wish to join the JAWS Users List send a blank email to the > following address: > [EMAIL PROTECTED] Visit the JAWS Users List home page at: http://www.jaws-users.com Address for the list archives: http://www.mail-archive.com/[email protected]/ To post to this group, send email to [email protected] To unsubscribe from this group, send an email to [EMAIL PROTECTED] For help from Mailman with your account Put the word help in the subject or body of a blank message to: [EMAIL PROTECTED] Use the following form in order to contact the management team http://www.jaws-users.com/BlindComputing.php If you wish to join the JAWS Users List send a blank email to the following address: [EMAIL PROTECTED] Visit the JAWS Users List home page at: http://www.jaws-users.com Address for the list archives: http://www.mail-archive.com/[email protected]/ To post to this group, send email to [email protected] To unsubscribe from this group, send an email to [EMAIL PROTECTED] For help from Mailman with your account Put the word help in the subject or body of a blank message to: [EMAIL PROTECTED] Use the following form in order to contact the management team http://www.jaws-users.com/BlindComputing.php If you wish to join the JAWS Users List send a blank email to the following address: [EMAIL PROTECTED]
