Chris An Rj11 to RJ11 will do the job. An RJ45 will go from the modem to the WAN (Wide Area Network)jack on your router.
Take care, Russ ----- Original Message ----- From: "Chris" <[EMAIL PROTECTED]> To: "Russ Breitenstein" <[email protected]> Sent: Wednesday, July 23, 2008 3:53 AM Subject: Re: [Blind-Computing] Microfilter Question > Hi, yes, that sounds more like it. Thanks for the help, however we still > don't know what cable we really need. I'm thinking we could try one of our > two RJ11 to RJ11, or dial-up modem, cables and plug it into the filter. Is > this right? Thanks again. > > -- > Chris Hallsworth > Derbyshire, UK > e-mail: [EMAIL PROTECTED] > msn: [EMAIL PROTECTED] > > Chris > It sounds like you will be using a DSL broadband connection. If this is > the > case then your DSL modem will plug into any one of the filters and use the > slot marked modem. If the phone system in the UK is like that of here in > the > States, the filters are provided to remove the static that you would here > in > your phones when DSL service is installed. The filters have both a 'phone' > and a 'modem' slot so they act as splitters which would allow a phone and > a > modem to share the same connection. The modem itself does not need a > filter, > only the phones. > > Hope this helps, > Russ > > ----- Original Message ----- > From: "Chris" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, July 22, 2008 1:14 PM > Subject: [Blind-Computing] Microfilter Question > > >> Hi all, we've just set up our network so we're ready for broadband this >> coming Thursday. However, I have a question. In the package were 3 >> microfilters, which are all set up. However, when I saw one of the >> filters, it had both a phone cable slot and a modem cable slot. We fitted >> the phone cables into the appropriate slot on both the filters and the >> phone lines. However, what is the modem cable slot for? For now we're not >> using it, however is this required for a successful broadband experience? >> I was at least able to see my wireless connection, and has connected to >> the network successfully, so the network itself is working properly, but >> we're not sure about this extra slot on our microfilters. Thanks in >> advance for answering my question, and I look forward to hearing from >> you. > >> -- >> Chris Hallsworth >> Derbyshire, UK >> e-mail: [EMAIL PROTECTED] >> msn: [EMAIL PROTECTED] > > >> Visit the JAWS Users List home page at: >> http://www.jaws-users.com >> Visit the Blind Computing home page at: >> http://www.blind-computing.com >> Address for the list archives: >> http://www.mail-archive.com/[email protected]/ >> To post to this group, send email to >> [email protected] >> To unsubscribe from this group, send an email to >> [EMAIL PROTECTED] >> For help from Mailman with your account Put the word help in the subject >> or body of a blank message to: >> [EMAIL PROTECTED] >> Use the following form in order to contact the management team >> http://www.jaws-users.com/BlindComputing.php >> If you wish to join the JAWS Users List send a blank email to the >> following address: >> [EMAIL PROTECTED] > > > > Visit the JAWS Users List home page at: > http://www.jaws-users.com > Visit the Blind Computing home page at: > http://www.blind-computing.com > Address for the list archives: > http://www.mail-archive.com/[email protected]/ > To post to this group, send email to > [email protected] > To unsubscribe from this group, send an email to > [EMAIL PROTECTED] > For help from Mailman with your account Put the word help in the subject > or body of a blank message to: > [EMAIL PROTECTED] > Use the following form in order to contact the management team > http://www.jaws-users.com/BlindComputing.php > If you wish to join the JAWS Users List send a blank email to the > following address: > [EMAIL PROTECTED] > > > Visit the JAWS Users List home page at: > http://www.jaws-users.com > Visit the Blind Computing home page at: > http://www.blind-computing.com > Address for the list archives: > http://www.mail-archive.com/[email protected]/ > To post to this group, send email to > [email protected] > To unsubscribe from this group, send an email to > [EMAIL PROTECTED] > For help from Mailman with your account Put the word help in the subject > or body of a blank message to: > [EMAIL PROTECTED] > Use the following form in order to contact the management team > http://www.jaws-users.com/BlindComputing.php > If you wish to join the JAWS Users List send a blank email to the > following address: > [EMAIL PROTECTED] > Visit the JAWS Users List home page at: http://www.jaws-users.com Visit the Blind Computing home page at: http://www.blind-computing.com Address for the list archives: http://www.mail-archive.com/[email protected]/ To post to this group, send email to [email protected] To unsubscribe from this group, send an email to [EMAIL PROTECTED] For help from Mailman with your account Put the word help in the subject or body of a blank message to: [EMAIL PROTECTED] Use the following form in order to contact the management team http://www.jaws-users.com/BlindComputing.php If you wish to join the JAWS Users List send a blank email to the following address: [EMAIL PROTECTED]
