Andre:
lol, I must have a low end laptop then.:) I have a hp laptop that was given
to me for work purposes, which there are more specs which I did not mention
but oh well.
I do not plan on doing any of the stuff you mentioned so should I just
remove it?
BTW, K I M S A N and not k i m s i n g smile!
I appreciate the thoughts though and I guess what I really want to know if
it is necessary to have this on or not. If not, away it goes.
Take care.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Andre Williams
Sent: Wednesday, December 08, 2010 12:51 PM
To: [email protected]
Subject: Re: [Blind-Computing] using cor tempt
Not really. What you stated below might be the case for a low-end computer.
High-end computers are built with the mindset that there will be great
demands made of them. Therefore, high-end components/hardware is used. This
might be the case if you are running a gaming computer or a media center
home theatre type of setup. To make these computers perform under such
loads, high quality resilient processors, ram, and motherboards etc are
used. In the past I have launched as many applications as possible and I've
let my computer run at over 70 degrees with over 60% of my quad core
processor running. I felt no performance hit at all. When running a DVD
movie I heard no impact on the audio and there was no flickering on the
screen. Just think of most average low-end computers such as Dell, HP, and
Gateway as Toyotas and act accordingly as you would not want to run these
kinds of cars at over 100 MPH on a regular basis. They can run like this,
but they are not constructed to do this so in no time at all you will have
problems if you run them hard.
In short, Kim sing, if you purchased your computer from Dell and such, and
if you do not start switching out parts, and if you don't change the
structure of the computer, you should be just fine. In all honesty, you
really don't need Core Temp and such as you're probably not going to be
modifying your fans or tweaking your processor and need to check for
abnormalities in temps. Right now I'm running my QuadCore with the following
temps: 55 degrees, 52 degrees, 58 degrees, and 53 degrees. I've been running
like this for months now.
Andre
----- Original Message -----
From: "Gerald Levy" <[email protected]>
To: <[email protected]>
Sent: Wednesday, December 08, 2010 11:08 AM
Subject: Re: [Blind-Computing] using cor tempt
It depends on the brand and type of processor. Check the specs for your
computer. It should list the maximum safe operating temperature. In
general, processor temperatures that exceed 60 degrees C are considered
unsafe, and most PC's will shut down if the processor temperature approaches
75 degrees C. So it looks like your PC is operating at a safe temperature.
Gerald
----- Original Message -----
From: "Kimsan" <[email protected]>
To: <[email protected]>
Sent: Wednesday, December 08, 2010 1:29 PM
Subject: Re: [Blind-Computing] using cor tempt
> Ok, writing some more with this core temp experience. what does 42 degree
> c
> and 41 degree c mean and is that good or bad?
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Kimsan
> Sent: Wednesday, December 08, 2010 10:10 AM
> To: [email protected]
> Subject: [Blind-Computing] using cor tempt
>
> Hello:
>
> Ok I managed to find the 64 bit version of core tempt so how does this
> program work? If its suppose to sit on the system tray, how do I get that
> to
> happen?
>
> For answers to frequently asked questions about this list visit:
> http://www.jaws-users.com/help/
>
>
> For answers to frequently asked questions about this list visit:
> http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
