Mike,
David just posted these. Thanks for replying.
Allen
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Mike B.
Sent: Sunday, May 20, 2012 1:14 PM
To: [email protected]
Subject: Re: [Blind-Computing] Needing instructions for stopping
JAWSsayingRead Only Edit, after opening an e-mail
Hi Allen,
Below are some steps I have saved. The first set of steps are for Jaws12 &
13, & the latter steps are for earlier versions of Jaws.
From: David
Hello there;
Do the following for the Settings Center in Jaws12 & 13;
1, open windows live mail;
2, press insert+6 on the numbers row,
3, now down arrow until you see/hear;
Speech and sound schemes,
Right arrow to open.
4,
Now down arrow and press the spacebar on,
Modify schemes...
Note if you press the enter key, you will be taken out of the modify scheme
button.
5, now tab and enter on,
Edit selected scheme button,
6, here you need to,
Shift+tab to general,
7, right arrow once you will hear;
Control type tab,
Tab one time into the listview,
8, now press the letter "r" until you hear;
Read only edit,
Now tab and use the down arrow key to select, ignore.
Now tab okay press enter.
Now again tab okay press enter.
Note you now will hear;
Modify Schemes
The current scheme has been modified and has not been saved. Would
you like to save it now?
Yes is highlighted press enter.
Tab okay press enter.
Now you shouldn't hear read only edit,
If you would like to make this athe default setting,
When you press insert+6 on the numbers row, and you, down arrow to
Speech and sound schemes,
Right arrow to open, now press,
Ctrl+shift+d=default.
Hope this helps.
David
From:
David
Hello there;
Another way to eliminate the read only;
1, open windows live mail,
2, insert+6=windows live mail settings center.
You're in a search edit field,
So type in speech,
Wait a few seconds, you will hear;
1 of 3 down arrow to speech and sound schemes and press enter.
Right arrow to open,
Now down arrow and press spacebar,
Modify schemes...
Now, you can follow the previous instructions I sent.
David
For earlier versions of Jaws using the Configuration Manager;
From: David
Hello give the following a try;
1. Press insert+#6 for the configuration manager.
2. Press ctrl+shift+D=default jaws file manager.
3. Press alt+S= set options menu.
4. Press the letter "M"= speech&sounds manager options.
5. Tab and enter on the edit current scheme button.
6. Ctrl+tab=control type tab.
7. Press the letter "R" in the listview until you hear read only edit.
8. Tab to the set of radio buttons and arrow down to the radio button for
ignore.
9. Tab and press enter on okay.
10. Tab and enter on okay again.
11. Press enter on yes to save the changes to the sound scheme.
12. Press alt+f4 to exit configuration manager and enter on yes to save the
changes.
You may need to restart jaws for the change to take effect.
David
From: Glenn Lemacher
to kill jaws saying, read only edit in dialog boxes or where ever it shows
its ugly head
here is what you can do
part of my configuration settings,
JAWS CONFIGURATION MANAGER
1open up jaws configuration manager, insert f2
2down arrow, to enter on configuration manager
3press, control shift d, delta, for the default configuration manager
note:
spacebar to check a check box,
or up or down arrow to change a radio button
if you want to know what any particular button does or check box
press inserrt f1 for help, escape to get out of help
press alt s, press the letter, m, for speech and sounds manager
tab twice, enter on, Edit Current Scheme button
press control tab, to control type page
press the letter r, twice to read only edit
tab once, and down arrow to ignore
tab to the ok button and press enter
tab once, to save current scheme button and press enter
tab to the ok button and press enter
press, control s, to save the settings
close the jaws configuration manager alt f4,
turn jaws off, insert f4,
turn jaws on, control alt j,
and u b done.
Glenn
----- Original Message -----
From: Allen Childs
To: [email protected]
Sent: Sunday, May 20, 2012 10:50 AM
Subject: [Blind-Computing] Needing instructions for stopping JAWS
sayingRead Only Edit, after opening an e-mail
Hi,
Sometime back, there had been some discussion on how to have JAWS
stop speaking Read Only Edit, after an e-mail. I did lose the
instructions
on how to do this. Can someone repost them?
I only want that silenced in my Outlook 2003. I use FS Reader and I
still want it announced in that.
I hope I explained everything ok.
Thanks,
Allen
I waited all night for the sun to come up, then it dawned on me.
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
