alright, well as long as it works for you, that's what is important take care, elf
-----Original Message----- From: Blind-Computing [mailto:[email protected]] On Behalf Of Mike B. Sent: Thursday, January 03, 2013 1:14 PM To: [email protected] Subject: Re: [Blind-Computing] Printer Installation Question Hi Inthane Elf & Norman, Well, I went the way of USB cable connection because I don't have wireless cards in the 2 desktops & this new all in 1 didn't have an ethernet cable port after all. Everything is now up & working excellent! Thank you for your input. Take care. Mike This email was sent from my, iBarstool. ----- Original Message ----- From: inthaneelf To: [email protected] Sent: Thursday, January 03, 2013 11:23 AM Subject: Re: [Blind-Computing] Printer Installation Question if you have the ports on your router for it, that would be the really nice way to do it, since that makes it universal instead of tied to one computer. and although I can understand Norman's aversion to "wire's going all over the place" I still value my networks speed over the trouble with Ethernet cables (yes, wireless is up to 300 mbps, but wired is 1000, quite a difference) elf -----Original Message----- From: Blind-Computing [mailto:[email protected]] On Behalf Of Norman King Sent: Thursday, January 03, 2013 11:05 AM To: [email protected] Subject: Re: [Blind-Computing] Printer Installation Question Hi. I would do it that way if I couldn't do wireless. I have an hp all in one here which I use with one computer. I got sighted assistance and connected it to the router via wireless. It works great. I don't think I'll use usb unless it's absolutely necessary. As you may have figured out by now I don't like a lot of wires going every which way. -----Original Message----- From: Blind-Computing [mailto:[email protected]] On Behalf Of Mike B. Sent: Thursday, January 03, 2013 9:51 AM To: Blind Computing Subject: [Blind-Computing] Printer Installation Question Hi all, We are going to have a new all in 1 Canon printer installed today & I would like to get the opinions of the list of the installation method. We share the printer between 3 computers via a network & in the past we've always hooked the all in 1 up to 1 computer with an USB cable. Well, this technician said he would hook it up this time using an ethernet cable & plugging it into the router. Does anyone have experience with this method & if so, would you please give us some feedback? All input will be greatly appreciated! Take care. Mike This email was sent from my, iBarstool. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
