ok. got that.
also i wanted to ask when doing free fly and i get takeoff cleared
from runway a1 or b1.
how do i know whare i am standing and whare is a1 or b1

On 7/6/17, Nail Alimzhanov <[email protected]> wrote:
> Hi Austin. Lets go step by step.
>
> First of all, before you actualy take off you need to figure out where
> you are flying. So press CTRL f8, find an airport that you need then
> press space bar. Now you are good to go. Just encase
>
> you need to press CTRL enter and look up the necessary speed for take
> off and landing.  Once you figured that one out you start your engines
> and ask for permission to take off by pressing f1
> After you received a permission you start moving on by pressing home
> key. You should also set up your nose angle up to 12%. While running
> donw the runway you should extand your flaps by pressing CTRL F. Once
> you got to a certain speed you here  a tower control telling you to
> climb up to 500. Don't add more speed at that time. Also you should
> retract your flaps By pressing CTRL F again and put away your landing
> gear by pressing CTRL G. Now, when the voice says take off successfull
> you can add mor speed. By pressing the R button you control your speed.
> By pressing the Z button on the keyboard you control your altitude. Once
> ou have gotten up to 500 you should level the jet by pressing the up
> button. At the same time you press T on your keyboard untill you here 0.
> It means that the jet is leveld. So with your up and down arrow keys you
> raise or lower your nose angle. You can actually raise and lower it up
> to 39 degrees. Be carefull though, cause it is extreamly high or it
> could be too low. So you would do it only if you need to change the
> altitude dramaticaly. Then you start pressing your right or left arrow
> keys to set on your course. By pressing the N key you understand how far
> to the left or to the right you have gotten. Keep the right course. It
> can change cause of the turbulance as well as your altitude could also
> change. Once you reach you destination airport you lower your speed with
> the EN button. Control it with the R buton. You have to remember what it
> is supposed to be. Also coming close to the destination airport you
> should be on 100 metres above the surface. When you receive a permission
> to land youpress your up arrow key a few times to lower your nose, i
> mean the nose of the jet to 12 degrees. Then extend your flaps and get
> your landing gear out it is done by pressin CTRL F and CTRL G. If
> everything is done properly, you should have safe landing.
> 06.07.2017 13:59, Austin Pinto пишет:
>> hi all.
>> sorry to all the experts of the euro fly game.
>> i am starting my first mission and i can take off successfully.
>> then it tells me clim to 500 and set destination headers something.
>> the plain climbs slowly any way to make clime fast?
>> then the real problem comes.
>> descend to 100 and at this point i crash.
>> i have red the documentations in the help center and it says press
>> down arrow to go up and up arrow to come done and i do that but i cant
>> make it.
>> do i have also to reduce speed?
>> when i press r key at this time i can hear something like 118/97 what is
>> this.
>> is there some demo audio tutorial that i can listen?
>>
>>
>>
>
>
> 
>
>


-- 
search for me on facebook, google+, orkut..
[email protected]
follow me on twitter.
austinmpinto
contact me on skype.
austin.pinto3

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#117405): https://groups.io/g/blind-gamers/message/117405
View All Messages In Topic (3): https://groups.io/g/blind-gamers/topic/5451171
Mute This Topic: https://groups.io/mt/5451171/21656
New Topic: https://groups.io/g/blind-gamers/post

Change Your Subscription: https://groups.io/g/blind-gamers/editsub/21656
Group Home: https://groups.io/g/blind-gamers
Contact Group Owner: [email protected]
Terms of Service: https://groups.io/static/tos
Unsubscribe: https://groups.io/g/blind-gamers/leave/607459/1071380848/xyzzy
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to