Hi There are two types of sensors designed to detect motion in a room of a home - a passive infrared sensor (PIR) and a dual-technology sensor, which includes passive infrared and microwave. Budget considerations will influence your choice. Selecting the Sensor Steps: 1. Survey your home and determine where you intend to put a motion sensor. 2. Choose areas where an intruder is likely to go. Common locations are in a hallway or stairway. 3. Remember that a passive infrared motion sensor detects heat. Eliminate spots where you must aim at heat vents, radiators, open windows where sunlight shines through, or windows where car headlights often shine through at night. 4. Choose a dual technology sensor that includes both microwave and infrared elements if aiming the sensor is a problem. 5. Select either a hard-wired or wireless motion sensor, which will depend on whether you have a hard-wired or wireless security system. 6. Drill holes in walls and route wires in and out of walls to the control panel if you have a hard-wired system. 7. Access a power source for a wireless motion sensor. Some infrared and dual technology motion sensors, however, come with a lithium battery that supplies power. Tips: With a dual-technology sensor, the infrared senses heat, and the microwave senses disturbances in sound waves. In order for a dual technology sensor to trip, both the microwave element and the infrared element must trip. If aiming is a problem, the infrared sensor can be masked so that it won't "see" an area that has a heat source. If you have a pet, it will influence the type of motion sensor you select. Some motion sensors include features that can estimate how big the target is as well as how much it weighs. These will focus on a person and ignore pets. Installing the Sensor Steps: 1. Gather the following tools: drill, screwdriver, screws, tools to fish wires through walls. 2. Read the installation instructions that come with the sensor. 3. Take into consideration the instructions and how you intend to aim the sensor. 4. Mount the sensor to a wall using the drill and screws. Remember to aim a passive infrared motion sensor away from a heat source. 5. Route the wire of the sensor (if it is a hard-wired sensor) along the baseboard and/or through walls to the control panel. 6. Connect the wire to the proper input. If you are using a wireless motion sensor, you may only have to route a wire to a power source. If the wireless sensor also includes a lithium battery, you will not have to route any wires at all. 7. Adjust the microwave element if you are using a dual-technology motion sensor that includes microwave and infrared. Tips: If you are using a passive infrared sensor and you have to aim it where a heat source is located, you can mask the sensor so that it doesn't "see" that heat source. An infrared sensor includes a concave mirror that looks like a fly's eye - a lot of notches on it. Each notch is pointed toward a different direction, and each notch watches a particular area of the room. If a heat source is within sight of the sensor, you need to determine which notch is watching that area and mask it with electrical tape so that the sensor will no longer see the heat source. Warnings: Some states regulate who can install home security systems. Moreover, the task requires that the do-it-yourselfer be well-skilled in electrical work. National codes concerning the electrical wiring of a home must also be taken into account.
********************************************************************** This message and its attachments may contain legally privileged or confidential information. If you are not the intended recipient, you must not disclose or use the information contained in it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete the e-mail. Any content of this message and its attachments which does not relate to the official business of Eraring Energy must be taken not to have been sent or endorsed by Eraring Energy. No warranty is made that the e-mail or attachment(s) are free from computer virus or other defect. ********************************************************************** [Non-text portions of this message have been removed] To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/