Hi An iron railing makes an elegant statement and will last a lifetime if you halt the progress of rust, which usually starts where the posts contact concrete or wherever paint has chipped. Apply a rust neutralizer, touch up chipped paint immediately, and repaint the bottom part of the posts every year and the entire railing every six to eight years. Here's how to do it all. Fixing a loose post Steps: 1. Drill or chisel out the concrete, leaving about 1/2 inch (12 mm) of space around the posts. If the railing is loose enough, remove it to make this task easier, and make any other repairs while it's off. 2. Position and brace both sides of the railing so it's plumb and level. Fill the holes with a fast-setting cement grout. Level and smooth the grout around the post with a mason's trowel. Clean the post with a wet sponge before any grout dries on it. Controlling rust Steps: 1. Cover the area under the railing with a drop cloth to protect nearby surfaces from stains, avoid contaminating the soil and reduce cleanup time. 2. Remove any loose rust with a scraper and wire brush. Sand or grind the rusty surfaces to smooth them out. The goal is to make them look neat when painted, not to remove all the rust. Use a wire brush or a wire wheel on an electric drill, or hand-sand with emery cloth, as seems appropriate. 3. To halt the corrosion process, chemically neutralize the rust. Brush on a rust neutralizer according to the product directions. Priming and painting Steps: 1. Remove any loose paint. For a better bond, degloss the surface with emery cloth. Emery cloth won't tear like sandpaper on hard-to-sand areas. 2. Scrub with a solution of laundry detergent and water to remove all dust and grime. 3. Apply two coats of rust-inhibiting (direct-to-metal) primer and a paint topcoat. If you're using spray paint, hold the spray nozzle 8 to 12 inches (20 to 30 cm) from your work and keep the can moving. To avoid drips, paint out of, not into, interior corners, and check just-painted areas frequently. If you lay on the paint with a roller or an airless sprayer, immediately follow up with a brush to work it into the surface. Overall Tips: Use a paint conditioner such as Penetrol to better seal the surface. Mix it into the primer or brush it on. When spraying, it's better to apply several light coats than a single heavy one. Overall Warnings: Wear goggles and clothing that covers your skin. If your railing was installed prior to 1978, see How to Solve a Lead-Paint Problem for special precautions you need to take.
********************************************************************** This message and its attachments may contain legally privileged or confidential information. If you are not the intended recipient, you must not disclose or use the information contained in it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete the e-mail. Any content of this message and its attachments which does not relate to the official business of Eraring Energy must be taken not to have been sent or endorsed by Eraring Energy. No warranty is made that the e-mail or attachment(s) are free from computer virus or other defect. ********************************************************************** [Non-text portions of this message have been removed] To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/[email protected]/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
