Ed, With just speed being the criteria, the Clickrule is faster. All you do to adjust the measurement with it is to undo the lock knob and slite the tool. With the Rotomatic, you screw the rectangular measuring nut along the tool.
Frankly, I use the Rotomatic a lot more than I use the Clickrule. I have used it longer and am very used to it and do require the accuracy. I use the cClickrule quite a bit, too. It just depends on what I am doing. Hope this helps. ----- Original Message ----- From: Edward Przybylek To: [email protected] Sent: Thursday, October 19, 2006 10:49 PM Subject: Re: [BlindHandyMan] click ruler or rototmatic ruler Hi Mickey, It sounds like both these devices take a little effort to get a measurement. Which of the two would you say is faster to use? With most of the things I do, I'm willing to sacrifice accuracy in favor of speed. Thanks. Take care, Ed Przybylek At 06:00 PM 10/19/2006, you wrote: >Rob, > >There really is not a "better". As others have said there is an >accuracy difference. They both have their advantages and disadvantages. > >The Clickrule is faster to adjust than the Rotomatic to get your measurement. > >The Clickrule will do inside measurements more easily than the >Rotomatic (in most circumstances), just because of its design. > >The Rotomatic will lie completely flat against your work piece so >that you get better measurements. Because of the 2 stop blocks and >the knob on the Clickrule, it won't always be lying right against >your workpiece and, therefore, your accuracy may suffer. > >The clickrule can actually have better than a 1/16" accuracy, >especially when transfering measurements. The lock knob can be >locked between the detents (which are 1/16" apart) for this added accuracy. > >The way you read the two devices is a bit different, too. The >Rotomatic is read at the 1/2" increments when the raised thread is >flush (you just can't feel it) with the edge of the large >rectangular nut and the mark is on the same side as the raised 1/2" >marks. The Clickrule 1/2" increments are read with the raised >thread left so that you can still feel it next to the body of the >tool. To check this with either tool: > >1. Run the big rectangular nut on the Rotomatic all the way to the >zero end of the tool and have it flush with the end with the mark on >the same side as the raised 1/2" marks. With the Click rule, flush >the end of the threaded piece with the body of the tool (the zero point. >2. Now with the Rotomatic, rotate the large rectangular nut exactly >8 full turns and you will see how it ligns up with the first 1/2" >raised mark. On the Clickrule, move the body of the tool exactly 8 >clicks to lengthen it and you will see how it aligns with the first >raised 1/2" mark. > >They both use 3/8" diameter extension rods, but the thread of the >attaching screw is different between the two rules. They both use a >Number 10 screw, but the Rotomatic uses a 10-24 coarse thread and >the Clickrule uses a 10-32 fine thread. I have both rules and have >changed all of the extension rods to the 10-24 thread, so that all >are interchangeable. I, also, make some of my own extension rods >which are up to 36" long. I have actually used these tools to well >over 20 feet in length. > >The Clickrule has 2 stop blocks on it so that you can read either up >to 6 inches or 12 inches. You will have to remember which stop >block you are using for each particular measurement. There is , >also, a 1/4" offset that you will have to get used to with both >tools. This comes into play depending on which side of the stop >block or the rectangular nut you are measuring to. You'll get the hang of it. > >Good luck > ----- Original Message ----- > From: Rob Monitor > To: [email protected] > Sent: Thursday, October 19, 2006 1:27 PM > Subject: Re: [BlindHandyMan] click ruler or rototmatic ruler > > > Hi, This is Rob again and I was wondering if any one would know which of > these rulers is better. The click ruler or the rototmatic ruler. > They are in > the NFB STORE. Also thank you for the information on the multimeter I sent > for one... > THANKS ROB > ----- Original Message ----- > From: "Dale Alton" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, October 19, 2006 12:53 PM > Subject: Re: [BlindHandyMan] talking tape measure... > > > Beyond Sight > > ----- Original Message ----- > > From: "Andrew J. LaPointe" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Wednesday, October 18, 2006 4:51 AM > > Subject: [BlindHandyMan] talking tape measure... > > > > > >> Clear DayHi, I have purchased a talking tape measure but, I can't > >> remember > >> where I got it from. I keep thinking I got it from Ann Morris. Can > >> someone tell me where someone can get this now? I have a friend that > >> would like to purchase one. Andy. > >> > >> > >> > >> [Non-text portions of this message have been removed] > >> > >> > >> > >> To listen to the show archives go to link > >> http://acbradio.org/handyman.html > >> or > >> ftp://ftp.acbradio.org/acbradio-archives/handyman/ > >> > >> The Pod Cast address for the Blind Handy Man Show is. > >> http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > >> > >> The Pod Cast address for the Cooking In The Dark Show is. > >> http://www.gcast.com/u/cookingindark/main.xml > >> > >> Visit The New Blind Handy Man Files Page To Review Contributions From > >> Various List Members At The Following Address: > >> http://www.jaws-users.com/handyman/ > >> Visit the new archives page at the following address > >> http://www.mail-archive.com/[email protected]/ > >> For a complete list of email commands pertaining to the Blind Handy Man > >> list just send a blank message to: > >> [EMAIL PROTECTED] > >> Yahoo! Groups Links > >> > >> > >> > >> > >> > >> > >> -- > >> No virus found in this incoming message. > >> Checked by AVG Free Edition. > >> Version: 7.1.408 / Virus Database: 268.13.7/488 - Release Date: > >> 10/19/2006 > >> > >> > > > > > > > > To listen to the show archives go to link > > http://acbradio.org/handyman.html > > or > > ftp://ftp.acbradio.org/acbradio-archives/handyman/ > > > > The Pod Cast address for the Blind Handy Man Show is. > > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > > > > The Pod Cast address for the Cooking In The Dark Show is. > > http://www.gcast.com/u/cookingindark/main.xml > > > > Visit The New Blind Handy Man Files Page To Review Contributions From > > Various List Members At The Following Address: > > http://www.jaws-users.com/handyman/ > > Visit the new archives page at the following address > > http://www.mail-archive.com/[email protected]/ > > For a complete list of email commands pertaining to the Blind Handy Man > > list just send a blank message to: > > [EMAIL PROTECTED] > > Yahoo! Groups Links > > > > > > > > > > > > > > > > >---------------------------------------------------------- > > > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.408 / Virus Database: 268.13.5/483 - Release Date: 10/18/2006 > > ---------- > >No virus found in this outgoing message. >Checked by AVG Free Edition. >Version: 7.1.408 / Virus Database: 268.13.5/483 - Release Date: 10/18/2006 > > >[Non-text portions of this message have been removed] > > > >To listen to the show archives go to link > http://acbradio.org/handyman.html >or >ftp://ftp.acbradio.org/acbradio-archives/handyman/ > >The Pod Cast address for the Blind Handy Man Show is. >http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > >The Pod Cast address for the Cooking In The Dark Show is. >http://www.gcast.com/u/cookingindark/main.xml > >Visit The New Blind Handy Man Files Page To Review Contributions > From Various List Members At The Following Address: >http://www.jaws-users.com/handyman/ >Visit the new archives page at the following address >http://www.mail-archive.com/[email protected]/ >For a complete list of email commands pertaining to the Blind Handy >Man list just send a blank message to: >[EMAIL PROTECTED] >Yahoo! Groups Links > > > ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.408 / Virus Database: 268.13.5/483 - Release Date: 10/18/2006 ---------- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.408 / Virus Database: 268.13.5/483 - Release Date: 10/18/2006 [Non-text portions of this message have been removed] To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/[email protected]/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/blindhandyman/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
