Thanks Ray for the information I asked you to send out. I figured these two topics are relevant considering that the holiday and heating seasons are upon us in the north east. For anybody who might be interested many of the posts Ray sends out are as a result of asking me and others what we think the list is lacking in certain areas. These aren't just random mailings. David Ferrin personal email address [EMAIL PROTECTED] Consciousness is that annoying time between naps. ----- Original Message ----- From: "Ray Boyce" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, November 18, 2006 12:27 AM Subject: [BlindHandyMan] Christmas Light, Safety
Hi The Christmas season is upon us, and outdoor decorations are being purchased and unpacked with anticipation. The holidays are enhanced by exterior lighting, but it is important to exercise caution when selecting and installing them. Each year, holiday lighting contributes to injuries caused by electrical shock, falls and fires. Holiday lighting fires annually cause property damage in excess of $16 million. Consider the following to avoid injury as you decorate for the holidays. . When purchasing outdoor Christmas lighting, look for labels marked with UL or ETL. This indicates the product has been tested by an independent laboratory recognized by the Occupational Safety and Health Administration (OSHA). Outdoor lights with these labels satisfy the minimum standards for product safety. . When selecting lights for exterior installation, be sure the packaging states that it is designated for outdoor use. Outdoor lighting is weatherproof and designed for temporary operation in harsh winter weather. Do not purchase used Christmas lights or lighting not in the original package. . When selecting outdoor lights, consider purchasing strings with miniature, low-heat producing bulbs. These lights require less amperage and are less likely to overload electrical outlets. . Purchase appropriately sized timers to automatically turn lights on and off. Lights should be turned off when people are not present and they should not be left on overnight. . Electrical outlets for exterior lighting should accommodate three-prong grounded plugs and should be on an electrical circuit protected by a ground fault circuit interrupter (GFCI). Portable outdoor GFCIs can be purchased at hardware stores if this circuit protection is not available. . If extension cords are required for outdoor lights, use those designed for outdoor use with three-prong plugs. Never use an indoor cord or a cord without the third prong. Plug the cord into a grounded outlet and select a cord with the shortest length that works for your project. Do not use a 100-foot extension cord for a 10-foot distance. Keep outdoor electrical connections above the ground and out of the snow and water. If extension cords must cross walkways, tape them down. . When connecting outdoor lighting, be careful not to create a maze of extension cords, plugs and wires that all come from the same electrical outlet. Electrical outlets and timers used for Christmas lights should be readily accessible for quick disconnection or adjustment as necessary. . When installing lights, be sure to read and follow the manufacturer's instructions. These instructions should be stored with the lights and referred to when purchasing replacement bulbs and on future installations. . Check the manufacturer's guidelines to determine the number of light strings that may be safely plugged together. If the packaging does not indicate the number, connect no more than three light strings together. . Before installing newly purchased or previously used Christmas lighting, plug the string in and make sure all the bulbs operate properly. When unpacking outdoor lights used during previous years, carefully inspect them for frayed, loose or bare wires and damaged bulbs or sockets. Discard damaged light strings. . One of the greatest dangers when installing outdoor lighting involves the use of ladders. Use a high-quality, sturdy ladder that is the proper height. Be sure it is securely positioned. To avoid falls, move the ladder as necessary rather than leaning on it from side to side. . When installing outdoor lights, use screw-in hooks or other fasteners that will not damage the insulation on the lighting strings. Nails and staple guns can easily cut or damage insulation and conductors. . Refer to the manufacturer's guidelines to determine the recommended spacing for supports and the maximum span allowed for the light string. Christmas lights are generally designed to span distances of only a few feet and should be supported at intervals every few feet. . Securely attach outdoor light strings to buildings, trees or other objects to prevent displacement by wind or other weather conditions. When possible, point the lamp sockets down to avoid moisture buildup and do not operate light strings with missing bulbs. . Unplug outdoor lights when replacing bulbs so there is no danger of shock. Reduce damage to lights by handling them carefully when installing and removing them and when packing and storing. . Remove outdoor lighting at the end of the Christmas season. Christmas lights are not designed to withstand prolonged exposure to sun and weather. To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/[email protected]/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links
