how doe you remove the screw from the end of the tool?
  ----- Original Message ----- 
  From: Barry Levine 
  To: [email protected] 
  Sent: Sunday, January 14, 2007 3:30 AM
  Subject: RE: [BlindHandyMan] Screw removal tool



  Hi Guys,

  I can't believe I did that! Dale, Bill, you were correct. The threads on
  these things are reversed. Duh!

  I was simply following the Home Depot guys instructions, which were... 
  "Put the removal bit in your drill, go slowly, then back out the screw."
  Rather incomplete instructions. I just had my wife actually read the
  instructions. You're supposed to drill the tool in reverse into the screw
  head, give it a tap with a hammer, and then back the screw out with a
  wrench. Lo! And behold! It works... when you follow the instructions.

  Dale, as for disorganizing the sizes in the set, they came in a handy little
  pack... much like a set of drill bits. So far, after one day, I still have
  them in their proper spaces. Good thing. I, too, am likely to toss a bit
  onto a workbench, followed by another, and another... til finally, the
  disorganization is complete.

  And, I too, have a real problem holding a hand drill on the horizontal or
  verticle. But, for screws with stripped heads embedded in a wall, there's
  not much choice.
  These screws were holding horizontal wood shelf braces on the side and rear
  walls of a closet. I was having so much trouble that I finally decided to
  try and pry the wood off the walls with a crowbar. Again... Duh! All I
  succeeded in doing was punching a hole in the wall with the crowbar.
  Note to self:
  Next time you use a crowbar against drywall, be certain there's a stud
  behind the spot which will take the brunt of the effort!


  --Barry


  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]



To listen to the show archives go to link
 http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/handyman/

The Pod Cast address for the Blind Handy Man Show is.
http://www.acbradio.org/news/xml/podcast.php?pgm=saturday

The Pod Cast address for the Cooking In The Dark Show is.
http://www.gcast.com/u/cookingindark/main.xml

Visit The Blind Handy Man Files Page To Review Contributions From Various List 
Members At The Following address:
http://www.jaws-users.com/handyman/

Visit the new archives page at the following address
http://www.mail-archive.com/[email protected]/  
For a complete list of email commands pertaining to the Blind Handy Man list 
just send a blank message to:
[EMAIL PROTECTED] 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/blindhandyman/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/blindhandyman/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[EMAIL PROTECTED] 
    mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

Reply via email to