Just happened to be browsing preparing an order when I found these. There are
cheaper places to shop and also cheaper alternatives. Really good miter fences
though are expensive. Probably that is why the ones which come with most saws
are pretty darn crappie.
Accu-Miter® - Woodworking
Accu-Miter® - Woodworking
Many table saws come with a miter gauge that cannot provide the accuracy you
need.
The Accu-Miter® gauge gives you accurate cuts (square or angled) and ensures
that cuts are made to the right length without the necessity of marking your
stock.
Suitable for all acute and obtuse angles up to 50°, the gauge has a convenient
positive stop mechanism at 15°, 22-1/2°, 30°, 45° and 90° angles.
The fence is a ribbed box extrusion 18" long and 2-3/4" high; it is graduated
and can be adjusted to give you exact measurements from the blade.
This, combined with a micro-adjust flip stop, lets you make repetitive
crosscuts accurately without measuring and marking. The stop also helps prevent
creeping
by giving your stock solid support. The fence has a graduated sliding extension
with its own stop, allowing you to crosscut boards to length up to 34".
The gauge comes with a ready mount, predrilled and tapped 3/8" x 3/4" x 20"
long table bar that is designed to fit most popular table saws (carefully
measure
the slot in your table saw to ensure fit prior to ordering).
A heavy-duty hold-down clamp that makes cutting safer and even more reliable is
also available separately.
Nested Table with 12 columns and 6 rows, nesting level 1
A.
Accu-Miter®
03J60.55
Additional views
$254.00
Add to cart
B.
Optional Clamp
03J60.52
Additional views
$71.50
table end
The miter guide supplied with most table saws is usually small, not
particularly rigid, and difficult to adjust with any degree of certainty. In
contrast,
the Osborne Miter Gauge is sturdy, easy to adjust, and accurate.
Suitable for square and angled cuts (acute or obtuse) up to 135°, it has a
large 2-1/2" high aluminum fence that extends from 24" to 42" for long stock.
Adjustable laterally for close blade clearance, the fence has a high-friction
grit face coating for stock grip.
The integral flip-up fence stop sets quickly (left or right) for repetitive
cuts. The angle arm has clear white-on-black markings with one-degree
graduations.
Common angles are preset using an integral plunge-detent system.
The 3/8" x 3/4" x 21-1/2" table bar has three adjustable expansion slots to
remove lateral play within the table slot. The guide is reversible for use on
either the right or left of the saw blade.
An excellent table-saw upgrade.(SOS)
Nested Table with 12 columns and 4 rows, nesting level 1
Osborne Miter Gauge
86N30.00
Additional views
$225.00
KregT Precision Miter Gauge System - Woodworking
A. Upgrading the miter gauge is an effective way to improve the performance of
many table saws. This gauge is sturdy, precise, and easy to set. Constructed
from machined aluminum, it is suitable for square crosscuts and acute or obtuse
angles up to 50°. An indexing pin locates commonly used settings, while
an easy-to-use vernier scale enables fine-tuning to 1/10th of a degree.
The 2-3/4" high by 25" long fence has an integral scale that combines with a
flip stop to provide a reliable direct-reading capability and ensure accurate
and repeatable cuts. The 3/8" x 3/4" x 24" table bar contains five adjusters to
take up play within the miter slot. Comes with right-to-left self-adhesive
tapes in both Imperial and metric so you can customize the gauge accordingly.
B. Available separately, the miter attachment fastens to the flip stop and
locks a 45°-mitered workpiece into position, preventing damage to its fragile
tip.
Nested Table with 12 columns and 6 rows, nesting level 1
A.
KregT Miter Gauge System
with Tape
86N40.12
$175.00
Add to cart
B.
Miter Attachment
86N40.11
$24.50
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
[Non-text portions of this message have been removed]
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/handyman/
The Pod Cast address for the Blind Handy Man Show is.
http://www.acbradio.org/news/xml/podcast.php?pgm=saturday
The Pod Cast address for the Cooking In The Dark Show is.
http://www.gcast.com/u/cookingindark/main.xml
Visit The Blind Handy Man Files Page To Review Contributions From Various List
Members At The Following address:
http://www.jaws-users.com/handyman/
Visit the new archives page at the following address
http://www.mail-archive.com/[email protected]/
For a complete list of email commands pertaining to the Blind Handy Man list
just send a blank message to:
[EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/blindhandyman/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/blindhandyman/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
