When I made the shelves for the TV stand I used MLCS biscuit joining kit at information at bottom. Basically you cut a slot every few inches along both the plywood and the edge banding stock. Then apply glue and insert #20 biscuits sideways and clamp. I really like that way but am considering purchasing the 60 degree edge banding bit set. I have quite a few of the bits and products from mlcs.
http://www.mlcswoodworking.com Edge Banding Router Bit Sets MLCS_edge_banding_router_bits MLCS_edge_banding_router_bits Add an attractive & durable edge to your cabinet doors and shelf edges. For use with plywood panels, MDF panels or shelves from 1/2" to 1" thick. All matched 2 piece bit sets are two flute carbide tipped. Simply center the male cutter on the stock and make the cut. Next match up the female cutter with the center point of the first cut. Finish by gluing together the two pieces and flush trim the edges, if necessary. Two styles are available. The 90° bits also make a horizontal V-groove or double sided chamfer. The 60° bits feature a tongue & groove for a larger glue surface area and easier alignment of edge banding. Recommend for use in a table mounted router. table with 7 columns and 5 rows Item # Style Large Dia. Carbide Height Shank Size Price #5432 90° 1-1/2" 1" 1/4" $39.95 graphics/orderbut #5433 60° w/ tongue & groove 1-7/16" 1" 1/4" $44.95 graphics/orderbut #7732 90° 1-1/2" 1" 1/2" $39.95 graphics/orderbut #7733 60° w/ tongue & groove 1-7/16" 1" 1/2" $44.95 Biscuit joining is one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition board, etc. By using our carbide-tipped 5/32" slot cutter, you can join corners (frame joining & mitre joining), edge to surface (butt joining & T-joining), and edge to edge. Use Item #5155 spiral upcut bit to cut slots in the center of the board which would be beyond the reach of a slot cutter. FREE INSTRUCTIONS available for these bits. table with 3 columns and 4 rows BISCUIT KITS - Includes router bit #20 BISCUIT KIT - 5/32" Cutter, arbor and 7/8" OD bearing plus 250 #20 biscuits. SET #16065 - 1/4" shank. Save $5.00 ON SALE! $33 graphics/orderbut SET #18365 - 1/2" shank. Save $5.00 ON SALE! Lenny http://www.geocities.com/lenny_mchugh/ [Non-text portions of this message have been removed] To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/[email protected]/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/blindhandyman/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
