Hi Mike, Sounds like the same cord Max was just talking about. I do have a input and out put for MD tape in, and MD tape out in back of the receiver. So correct me if i'm wrong. if i run the wire from the back of the computer, to a AM/FM cassette recorder, or CD/DVD recorder. Then feed the receiver from the recording device. I will not only get to enjoy the music on my receiver, but also get to record at the same time?. Is this correct? Roger C Bachelder 3rd [EMAIL PROTECTED]
_____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Rusk Sent: Sunday, July 08, 2007 7:06 PM To: [email protected] Subject: Re: [BlindHandyMan] Computer and receiver I use an am/fm radio with tape dec for my speaker system on my computer. I just used a patch cord that had the single jack that plugs in to the computer sound card and the other end has 2 jacks that plug in to the radio auxiliary. If I want to use an earphone or a set of head phones I just plug them into the radio unit. I could add speakers to the output side as there are jacks for that, but this is good enough and when I want to hear the radio or play a tape I can switch over to either of them without bothering the computer. I used it some when I was taking an online course to record the lesson. ----- Original Message ----- From: Roger Bachelder To: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com Sent: Sunday, July 08, 2007 10:06 AM Subject: [BlindHandyMan] Computer and receiver Hi guys, I'm looking to make my computer sound go through my Receiver. Is there a simple way of doing this? And if so, Can someone point me in the direction on how to do this? Thanks, Roger C Bachelder 3rd [EMAIL PROTECTED] <mailto:Bachelder3%40verizon.net> net [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
