When Changing Clocks Back to Standard Time, Check Batteries and Age of
Alarms - CPSC Recommends Replacing Older Alarms

WASHINGTON, D.C.- Since 1992, the U.S. Consumer Product Safety
Commission (CPSC) has reminded consumers to check smoke alarms and
change batteries when they change their clocks, but in that time, many
alarms have lost their effectiveness. This year, CPSC wants to remind
consumers to replace smoke alarms every ten years and replace carbon
monoxide (CO) alarms every five years.

In a national telephone survey of households conducted by the CPSC, 97
percent of homes had at least one smoke alarm. That's good news, but
without fresh batteries, alarms will not work when needed. And the
sensors in alarms will degrade and lose effectiveness over time because
of environmental contamination and age.

According to National Fire Protection Association (NFPA) reports, there
were more than 1.6 million fires reported in the United States in 2005.
These fires caused about 3,700 civilian deaths and 18,000 injuries.
Additionally, from 2002-2004, CPSC estimated a yearly average of 166
deaths from unintentional, non-fire related CO exposure.

"Millions of Americans are without adequate protection from fire and CO
because the alarm's battery is dead or the alarm is too old," said CPSC
Acting Chairman Nancy Nord. "Alarms don't last forever, and old ones
need to be replaced."

Consumers need to remain vigilant against carbon monoxide poisoning and
fires. CPSC recommends three simple tips to protect your life, your
loved ones, and your home:

1. Make sure your home is protected with both smoke and CO alarms.
   Combination smoke/CO alarms are available in the marketplace.

2. Test alarms monthly to make sure they are working.

3. Once a year, change batteries when you change your clocks.

Reply via email to