For the new jacks, when i install them, I might, but the jacks I have I can cut the wires and re rout them. Michael
_____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Dale Leavens Sent: Saturday, November 24, 2007 09:32 To: [email protected] Subject: Re: [BlindHandyMan] Telephone wiring Just a thought but if you are going to that much trouble why not run cat5 throughout? For now it is overkill but so it 11 jacks and once there it is always there. Dale Leavens, Cochrane Ontario Canada [EMAIL PROTECTED] <mailto:DLeavens%40puc.net> net Skype DaleLeavens Come and meet Aurora, Nakita and Nanook at our polar bear habitat. ----- Original Message ----- From: Michael Baldwin To: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com Sent: Saturday, November 24, 2007 10:00 AM Subject: [BlindHandyMan] Telephone wiring Okay, I have had pore quality phones ever since I moved in here, and i am tired of it. the problem is on my end not the telcos. I know which junction is causing the issues, but instead of fixing it, I want to redo it. I use DSL as well. The DSL line seems fine, but it is connected directly to the NID. My plan Run CAT5E from the NID to a junction box, or a 110 block, which I know nothing about, just read about them. then run each jack directly from the junction with regular 3 pair phone wire. I only have one phone number now, but I never know what I will do in the future. I will have 11 jacks total, they all won't be installed right away. There won't be a phone on each jack, some will be just additional jacks in the same room, in case of a different phone location. sound good? Any tips on using a 110 block? other ideas? thanks, Michael [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
