Can you tell me why I only got one column? Ron ----- Original Message ----- From: Boyce, Ray To: [email protected] Sent: Wednesday, December 19, 2007 8:37 PM Subject: [BlindHandyMan] Metric Tap and Drill Bit Size Table
Metric Tap and Drill Bit Size Table Table with 3 columns and 18 rows Tap Metric Drill US Drill 3mm x 0.6 2.5mm - 4mm x 0.7 3.4mm - 5mm x 0.8 4.3mm - 6mm x 1.0 5.2mm - 7mm x 1.0 6.1mm 15/64 8mm x 1.25 6.9mm 17/64 8mm x 1.0 7.1mm - 10mm x 1.5 8.7mm - 10mm x 1.25 8.9mm 11/32 10mm x 1.0 9.1mm - 12mm x 1.75 10.5mm - 12mm x 1.5 10.7mm 27/64 14mm x 2.0 12.2mm - 14mm x 1.5 12.7mm - 16mm x 2.0 14.2mm 35/64 16mm x 1.5 14.7mm - Drill sizes are for 75% depth of thread. ********************************************************************** This message and its attachments may contain legally privileged or confidential information. If you are not the intended recipient, you must not disclose or use the information contained in it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete the e-mail. Any content of this message and its attachments which does not relate to the official business of Eraring Energy must be taken not to have been sent or endorsed by Eraring Energy. No warranty is made that the e-mail or attachment(s) are free from computer virus or other defect. ********************************************************************** [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
