Another advantage to a two or even a three board tread is that in time, if 
there is rot or splitting or other damage it is unlikely to effect the entire 
tread, you can just pull the effected board and replace it.

Even though the stringers are quality timber I would recommend treating them 
with something noxious to improve resistance to insect and rot. Treads are 
fairly easily replaced but not so the stringers.
Of course treating the treads won't hurt either.



Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.


  ----- Original Message ----- 
  From: Larry Stansifer 
  To: [email protected] 
  Sent: Thursday, January 17, 2008 9:16 AM
  Subject: RE: [BlindHandyMan] what's up with wood?


  Dale,
  The old steps were covered with indoor/outdoor carpeting and they did have
  risers however he is going to eliminate them along with the carpeting.
  I am thinking that the two board per step idea will provide a few more
  fitting options thus making it a better way to go.*as if I know anything*
  Thanks for the ideas guys and I will pass them on.

  -----Original Message-----
  From: [email protected] [mailto:[EMAIL PROTECTED]
  On Behalf Of Dale Leavens
  Sent: Wednesday, January 16, 2008 7:47 PM
  To: [email protected]
  Subject: Re: [BlindHandyMan] what's up with wood?

  Hi Larry,

  Are the treads full depth? That is, 10 or 11 or 12 inches or something or
  are they narrower boards intended to be installed with a space or gap
  between them?

  Are there risers?

  You can cheat a little by backing the rear edge of the tread under a riser a
  little more or less and if the tread boards are gapped again you can add a
  little spacing here and there and remove a little the eye won't see it.

  Often spaces are left between tread boards to encourage water to get away
  more rapidly and it helps to keep the steps from becoming too slippery. Of
  course if there aren't intended gaps one could rip the treads down to
  narrower boards then instal them as individual boards.

  Hope there are some ideas useful to you in there..

  Dale Leavens, Cochrane Ontario Canada
  [EMAIL PROTECTED]
  Skype DaleLeavens
  Come and meet Aurora, Nakita and Nanook at our polar bear habitat.

  ----- Original Message ----- 
  From: Larry Stansifer 
  To: [email protected] 
  Sent: Wednesday, January 16, 2008 6:57 PM
  Subject: [BlindHandyMan] what's up with wood?

  Hi guys,

  This afternoon I got a call from a friend who is rebuilding his porch
  stairs.
  He has 6 steps going up to a deck height of just over 48". As I patiently
  explained to him he is absolutely talking to the wrong guy but armed with
  a
  talking tape and a leftover 6pack of Christmas ail I attempted to lend a
  hand.
  I found out that he had the stringers commercially cut and frankly they
  looked good. I put a tape on them and found out that the portion that the
  stair tread was attached to measured anywhere from 10&1/8" to 10&3/4". How
  can we even up those steps without it looking like */%^? The sides of the
  treads which are 4' in length are warped in different directions with
  weird
  little chips and dents along the edges. He told me the material is redwood
  and that it is supposed to be the best. The question is does he go with
  2x12
  and custom fit them, or some other kind of termite magic? 
  I drank two of the Christmas ails and told him to call me when he wanted
  metal stairs.

  TNX

  Larry

  [Non-text portions of this message have been removed]

  [Non-text portions of this message have been removed]

  To listen to the show archives go to link http://acbradio.org/handyman.html
  or ftp://ftp.acbradio.org/acbradio-archives/handyman/

  The Pod Cast address for the Blind Handy Man Show is.
  http://www.acbradio.org/news/xml/podcast.php?pgm=saturday

  Visit The Blind Handy Man Files Page To Review Contributions From Various
  List Members At The Following address:
  http://www.jaws-users.com/JAWS/handyman/

  Visit the archives page at the following address
  http://www.mail-archive.com/[email protected]/ 

  If you would like to join the JAWS Users List, then visit the following
  address for more information: http://www.jaws-users.com/ For a complete list
  of email commands pertaining to the Blind Handy Man list just send a blank
  message to: [EMAIL PROTECTED] 
  Yahoo! Groups Links

  -- 
  BEGIN-ANTISPAM-VOTING-LINKS
  ------------------------------------------------------

  Teach InfoWest Spam Trap if this mail (ID 151264686) is spam:
  Spam:
  https://spamtrap.infowest.com/canit/b.php?i=151264686&m=3da01f549b8d&c=s
  Not spam:
  https://spamtrap.infowest.com/canit/b.php?i=151264686&m=3da01f549b8d&c=n
  Forget vote:
  https://spamtrap.infowest.com/canit/b.php?i=151264686&m=3da01f549b8d&c=f
  ------------------------------------------------------
  END-ANTISPAM-VOTING-LINKS



   

[Non-text portions of this message have been removed]

Reply via email to