Well I guess I relate the three different desks I have lived with and some of 
the good and bad parts of them.  My first was a old metal army desk that 
elvolved into a longer desk with a nine foot extenion fixed to the wall wtih 45 
degree angle braces.  With bookshelves over head, a c c t v, a 23 inch monitor, 
a stand alone scanner and a printer it all strung out and took up most of the 
length.  The major help here was a office chair that reclined fairly nice, with 
rollers on the legs and having a tile floor for ease of movement from one spot 
to another.  Yes it was all strung out in a line.
 
Next I moved up stairs into a narrow bedroom.  I had two desks with a somewhat 
narrow walkway between.  The large monitor, tower, and combo scanner,printer 
was on the one desk.  Across the walkway was the C C T V monitor and camera.  
This worked fair once I got it a little offset so I could read on the C C T V 
screen and type on the computer.  Bad was the carpet with pad and the bearings 
starting to fall out of the cair leg rollers.  

Finally when I moved in June the room was very small.  I moved one of the 
tradetional desks from upstairs and cut it down in length so it could fit into 
the room.  On it I placed the tower on the end against the wall, then a new 
flat screen monitor then the C C T V camer and then a monitor  for it.  On the 
wall back of this in the other room I placed the printer/scanner with cable 
through on top of a couple of file cabinets.  The stand alone fax is on another 
file cabinet next to it..  I have replaced the rollers with new ones and the 
carpet is on concrete slab with no pad.  
The easy moving chair for me is a must..  The desk stands away from the wall 
enough for all excess cable to fall behind, but is still relatively easy to 
retrieve, but is out of sight..  As for storing software, paper, ink and the 
like there are in the file cabinets just outside the door.  Of course I have 
book shelves above the desk The standred desk has three drawers on each side 
and sadely the keyboard is at desk heigh of the 30 inches.  Not ideal for some 
but I tend to kick the chair back into a tilt so it works for me.  My arms 
actually rest on the chair arms rather than the desk.  The keyboard is at the 
front edbge mostly in front of the camera table.  Sometiems it seems tight, but 
in a way efficient.  If I was wishing I would like the tower in a shelf, or 
tall drawer below the desk top.  
Well I have rambled a bit and probably haven't given any advice other than I 
like a chair that works for me.
Ron
  ----- Original Message ----- 
  From: Bill Gallik 
  To: [email protected] 
  Sent: Wednesday, January 23, 2008 3:30 PM
  Subject: Re: [BlindHandyMan] Brainstorming Design for Computer Desk


  Thank you Betsy,

  This is precisely the type of thought I'm asking for in this thread. Your
  suggestions are very much appreciated -- unlike a few other wise asses whom
  shall go unmentioned!!! ;-)

  Hear that Dan, Dave, Victor???
  ----------------
  Bill Gallik
  E-Mail: [EMAIL PROTECTED]
  - "Nothing is more admirable than the fortitude with which millionaires
  tolerate the disadvantages of their wealth."
  - Rex Stout



   

[Non-text portions of this message have been removed]

Reply via email to