Great article,  sure does sound like one could have a serious problem,  when 
adding,  if you just grabbed a  can of transmission oil, and pored it in with 
out knowing  these things.  You could screw up one of the more expenseive, 
parts of your car.   in a big hurry.  Don
  ----- Original Message ----- 
  From: Ray Boyce 
  To: [email protected] 
  Sent: Friday, February 29, 2008 1:58 AM
  Subject: [BlindHandyMan] Know which automatic transmission oil to use


  It used to be so simple. There was Type A or Type F. If your automatic 
  transmission needed oil, you only had two to choose from. Many Fords used 
  Type F
  transmission oil while Type A was used in everything else. Today, there are 
  several types of oil specified for automatic transmissions. Using the wrong
  one can cause shifting problems or even damage your transmission. Here are 
  the more common automotive transmission oils used today.

  Dexron Automatic Transmission Fluid (ATF) is probably the most common oil 
  found on the parts shelves today. It used to be called Type A transmission 
  oil
  but as improvements were made to the oil, the name was changed to Dexron. 
  Many types of Dexron oil have been used over the years. The original Dexron 
  oil
  became Dexron II, which developed into Dexron IIE in the early 1990's. 
  Dexron IIE used extra additives that helped clean computer-controlled shift 
  solenoids
  and pressure control solenoids inside the transmission. After only a short 
  time, Dexron IIE became Dexron III, which is still the current Dexron 
  designation.

  So which one should you use? The answer is easy. Dexron III is the only 
  Dexron oil available and it can be used wherever Dexron oils were specified. 
  Most
  General Motors vehicles, many foreign manufacturers, Chrysler vehicles (up 
  until about 1997} and even Fords from the 1950's listed Dexron oil as 
  suitable
  for their automatic transmissions. Dexron has even been specified in some 
  industrial hydraulic systems and power steering systems, although most 
  automobiles
  use special power steering fluid for their power steering.

  Type F oil has traditionally been associated with Ford vehicles prior to 
  1977, but is was also used in some other makes between 1977 and 1981. Type F 
  oil
  has different additives in it that match the friction characteristics of the 
  clutch plates used in their automatic transmissions. The additive package
  in Type F oil is very strong, so one litre of Type F oil added to several 
  litres of Dexron oil will essentially change all the oil to have Type F 
  characteristics.
  For example, if Type F oil was added to a GM vehicle, the shifts would feel 
  more aggressive. Type F oil is not interchangeable with MERCON ATF.

  MERCON ATF is used in most late model Fords up until 1997, when MERCON V ATF 
  came into use. MERCON ATF is much like Dexron and many ATF labels will list
  the oil as suitable for both Dexron and MERCON applications. MERCON V is 
  different. Beginning in 1997, Ford began building transmissions for some of 
  their
  large cars, trucks and vans that require a MERCON V ATF. Generally, MERCON V 
  and MERCON oils are not interchangeable although there are some ATF brands
  on the market that meet the specifications for both. Check the label on the 
  ATF container carefully!

  Although Chrysler has always had their own ATF specifications, they also 
  listed Dexron as an acceptable replacement. That changed in 1997 with the 
  introduction
  of their ATF+3 fluid. ATF+3 is suitable in any vehicle calling for ATF PLUS, 
  ATF+2 or a Type 7176 ATF. Some Mitsubishi and Hyundai transmissions also use
  this oil.

  Some vehicles have very specific oils for their automatic transmissions. 
  Honda for example, uses engine oil for automatic transmissions in some 
  models.
  ZF automatic transmissions found in many European and some Asian vehicles 
  often specify ESSO LT 71141 or T-IV ATF only! There are also synthetic 
  transmission
  fluids available on the market, but before using one, make sure it meets the 
  specifications for your transmission. One-way roller and sprag clutches used
  in many automatic transmissions require some friction to work, so the wrong 
  oil can reduce their efficiency and cause them to slip.

  The owner's manual will list the proper type of fluid for your vehicle's 
  transmission, or if you can't find it, check at your local dealership for 
  their
  recommendations. While most quick lube places have listings for most 
  vehicles, they may not be familiar with your particular vehicle and could 
  add the
  incorrect oil. Know the type of oil your transmission needs and be sure to 
  ask what they are adding before they put any in.

  The automatic transmission has come a long way from a novelty introduced in 
  1940 by Oldsmobile to the highly sophisticated computer-controlled gearbox 
  of
  today. So have the oils. Use the correct oil for your transmission to 
  prevent damage to this essential part of your vehicle's driveline.



   

[Non-text portions of this message have been removed]

Reply via email to