Max I have one. I got it @ MaxiAids
Al -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of Agent86b Sent: Tuesday, May 20, 2008 10:11 PM To: [email protected] Subject: Re: [BlindHandyMan] Re: Setting air compressor gage Talking tire air pressure gage?? Not heard of such a thing. I will go looking. Thanks for the idea. Max. on 11:19 21/05/2008, lenny_mchugh said: >I have had a fitting made that has a brass truck valve stem brazed to a >1/4" >male quick disconnect. I put it in the compressor. Then I use a talking >tire >air pressure gauge for the readout. >--- In ><mailto:blindhandyman%40yahoogroups.com>[email protected], >Agent86b <[EMAIL PROTECTED]> wrote: > > > > Hi all, > > has anybody found a way of setting the air pressure to the correct > > PSI for particular tools? > > For example my air drill must run at 90 PSI, but my compressor tank > > is factory set to 115 PSI. > > I can get my sited wife to come and read the two gages to tell me > > what I have, but I would rather do it myself. Otherwise I must wait > > for her to come home before using a different tool. > > Thanks for any advice. > > Max. > > > > [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
