DEWALT Recalls Cordless Brad Nailers Due to Injury Hazard

 

WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in
cooperation with the firm named below, today announced a voluntary recall of
the following consumer product. Consumers should stop using recalled
products immediately unless otherwise instructed.

 

Name of Product: DEWALT DC608 Cordless Brad Nailers

 

Units: About 14,000

 

Manufacturer: DEWALT Industrial Tool Co., of Towson, Md.

 

Hazard: The nailer can operate when the lock-off (safety) is in the locked
position. Also, the nailer can operate when the trigger is not pulled and
the contact trip is depressed. The unexpected ejection of a nail poses a
serious injury hazard to consumers.

 

Incidents/Injuries: DeWALT has received two reports of nailers operating
when the lock-off (safety) was in the locked position. No injuries have been
reported.

 

Description: This recall involves the DEWALT DC608 18 Volt Cordless 2" 18
Gauge Straight Brad Nailer with date codes 200728 through 200821. "DC608" is
located on the right side of the magazine. The date code can be found on the
underside of the handle, once the battery pack is removed. Units stamped
with an "M" following the date code are not included in this recall.

 

Sold at: Wholesale distributors and retailers from October 2007 through May
2008 for about $280.

 

Manufactured in: Mexico

 

Remedy: Consumers should immediately stop using the nailers and contact
DEWALT for the location of the nearest service center to receive a free
repair.

 

Consumer Contact: For additional information, contact DEWALT toll-free at
(866) 220-1481 between 8 a.m. and 5 p.m. ET Monday through Friday, or visit
the company's Web site at www.DEWALT.com

Next One

Name of Product: Chicago Electric Halogen Work Lights

 

Units: About 58,000

 

Distributor: Harbor Freight Tools, of Camarillo, Calif.

 

Hazard: The halogen work lights can overheat and melt, and pose a risk of
fire and electrical shock to consumers.

 

Incidents/Injuries: There have been three reports of incidents in which the
recalled halogen work lights overheated and melted. No injuries have been
reported.

 

Description: The halogen work lights are 500 watts. Model number 30858 is
included in this recall. The lamp measures 7 inches wide x 5 ½ inches high
and is mounted on a yellow frame. "UL Listed E163392" and "Work Light 8F95"
is printed on a sticker on the back. The model number is printed on the
light's packaging.

 

Sold at: Harbor Freight Tools stores nationwide, Harbor Freight Tools'
catalogs, and at www.harborfreight.com from February 2006 through March 2008
for about $10.

 

Manufactured in: China

 

Remedy: Consumers should immediately stop using the halogen work lights and
contact Harbor Freight Tools for a full refund.

 

Consumer Contact: For additional information, contact Harbor Freight Tools
at (800) 444-3353 between 8 a.m. and 4:30 p.m. PT Monday through Friday,
visit the firm's Web site at www.harborfreight.com, or email the firm at
[EMAIL PROTECTED]

 

 



[Non-text portions of this message have been removed]

Reply via email to