well to get a drill bit in there is kind of tricky its tuff to discribe but the drill would have to be at a angle. maybe if i used a vise to hold the nailer. i don't want to use an ice pick because i don't want to drive the shell tighter in there. jim At 12:43 PM 8/17/2008, you wrote:
>Jim: > >.22 cartridges are rim-fire. If the shell has fired, you could probably >drill a small hole in the center of the cartridge and use an ice pick or a >piece of bent coat hanger wire to pull it out of the chamber. You want to >be certain though that the thing has fired before you try this. > >-----Original Message----- >From: ><mailto:blindhandyman%40yahoogroups.com>[email protected] > [mailto:[EMAIL PROTECTED] >On Behalf Of cheetah >Sent: Sunday, August 17, 2008 12:18 >To: <mailto:blindhandyman%40yahoogroups.com>[email protected] >Subject: [BlindHandyMan] power nailer help. > >ok heres one >i have a power nailer. >the kind where you put a 22 blank shell in the middle and a nail in >the end andwack the end with a hammer. >the shell goes bang and the nail goes through the wood and concreat >and whatever else. > >well the last time i used it the shell got stuck in the chamber and i >can not get it out. >any ideas how to get that blasted thing out? >jim > >[Non-text portions of this message have been removed] > > >No virus found in this incoming message. >Checked by AVG - http://www.avg.com >Version: 8.0.138 / Virus Database: 270.6.4/1616 - Release Date: >8/16/2008 5:12 PM
