Sounds like you can't afford what you are looking for. But you do have a circular saw and with a little time it can do wonders by making a jig to cut your material straight. For a example. just clamp on a board, allowing the width of the guide to the blade on your saw will give you a straight cut down a 8 foot 4 x 8 piece of plywood. Or went cutting a cross a 2x4 for example, use any material for the base, like OSB board and fasten a couple 2x4 to the board far enough apart to be able to slide the 2x4 to be cut in between the two boards. Take a square and square a board a cross the 2 board, a thin piece of paneling works great for the purpose. Now you have a jig to cut the material straight. If, went cutting several boards the same lenght, just nail or clamp on a small piece of material at that lengt along the jig and bump your material on the stopper. RJ
[Non-text portions of this message have been removed]
