Dale, Even when i extend it out completely there is no latch. But i did get a hold of the person who gave me these drawer glides, and he said there is a piece on the drawer that latches to the slide, so that makes me glad i can use these slides. Now I just have to pick out some hinges, any ones you like for a face frame cabinet? Thanks, Michael
_____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Dale Leavens Sent: Sunday, November 30, 2008 6:02 PM To: [email protected] Subject: Re: [BlindHandyMan] Drawer Slides Michael, Can you move one glide within the other? That is, slide it like the drawer would? At a guess you have to pull the drawer component all the way extended before it can be released from the cabinet component. ----- Original Message ----- From: Michael Baldwin To: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com Sent: Sunday, November 30, 2008 5:55 PM Subject: RE: [BlindHandyMan] Drawer Slides Dale, Well there is one for each side, and they go under the drawer, they are hidden. here is a link to them at rockler. http://www.rockler. <http://www.rockler.com/product.cfm?page=10843> com/product.cfm?page=10843 There is an instruction sheet, but it makes no sense to me. I think I am missing some latch piece that goes on the drawer itself. Michael _____ From: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com [mailto:blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com] On Behalf Of Dale Leavens Sent: Sunday, November 30, 2008 11:05 AM To: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com Subject: Re: [BlindHandyMan] Drawer Slides Hi Michael, I am not familiar with that particular slide, or under that name anyway. Is this the sort with a right and left slide, one for each side of the drawer? Is it the sort that attaches to the bottom of the edge of the drawer or does it connect to the side panel of the drawer? I have some side mounting drawer slides with a little catch you have to release before the two halves of the slide can be separated. ----- Original Message ----- From: Michael Baldwin To: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com Sent: Sunday, November 30, 2008 10:49 AM Subject: [BlindHandyMan] Drawer Slides Hi, I got a few sets of the Tandem plus Blumotion Drawer Slides, but I am not sure on how to install the drawer to the slide. I can't find anywhere to remove the part the drawer rests on. Has anyone installed these slides before, and have some advice? The slides were just given to me. I am wondering if there is a part of the slide that I was not given. Thanks, Michael [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
