Ron, Feel down the outside surface of the drawer slide. You should encounter a small spring loaded tab, if memory serves the end of the tab closest to the front of the box can be pried outboard with a common screwdriver, with this tab released gently slide the track *not the drawer* inward as if you were going to close the drawer. You will know if you have it right if the tab stands out about 4mm from its original position. Repeat the procedure on the other side and the drawer should slide out into your hands. I personally have never owned a Craftsman box however I used to have an apprentice who went through your same dilemma a couple of times a week. I did finally make him a fix for that problem so if this occurs regularly let me know and I will post it for you or any other Sears tool box owner.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ron Yearns Sent: Thursday, January 01, 2009 8:05 PM To: [email protected] Subject: [BlindHandyMan] tool cabinet OK help. I have a roll around Sears Craftsman tool cabinet. Steel 4 drawer locking. Here is what has happened. A set of sockets in a plastic case was lain in the bottom drawer on top of some other stuff , somehow in shutting the drawers it slid and is setting vertical behind something else. Anyway the second drawer up will not shut and the bottom is not asseble because the second drawer up is being pulled out with this plastic case. We, myself and sighted wife have looked and can find no latches to free the drawer on top so we could pull it entirely out of the cabinet and fix things. Is there a hidden catch or am I going to have to saw part of the back out of the upper drawer so I can fish my hand down into the other one. Ron ------------------------------------ Send any questions regarding list management to: [email protected] To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster&PAG E_user_op=view_page&PAGE_id=33&MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions >From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/[email protected]/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [email protected]! Groups Links -- BEGIN-ANTISPAM-VOTING-LINKS ------------------------------------------------------ Teach InfoWest Spam Trap if this mail (ID 234524552) is spam: Spam: https://spamtrap.infowest.com/canit/b.php?i=234524552&m=54f7 913cf966&c=s Not spam: https://spamtrap.infowest.com/canit/b.php?i=234524552&m=54f7 913cf966&c=n Forget vote: https://spamtrap.infowest.com/canit/b.php?i=234524552&m=54f7 913cf966&c=f REMEMBER: Never give out your account information, password, or other personal information over e-mail. ------------------------------------------------------ END-ANTISPAM-VOTING-LINKS
