Hi Tom, When crown molding is installed it is on an angle with part touching the wall and the other part against the ceiling. I don't remember the degree of the molding I think around 38º. To produce it you need a compound cut of 31.6º for the miter and 33.9º for the bevel. I would have to recheck that number to make sure. The best way for the inside corner cut is to cope it. I have read about the 31.6/33.9 also for some picture frames. Always wanted to try that just have always procrastinated. ----- Original Message ----- From: "Tom Hodges" <[email protected]> To: <[email protected]> Sent: Saturday, January 17, 2009 10:33 AM Subject: RE: [BlindHandyMan] miter saw stops
Does anyone know what the 31.6 degree stop is for? If I have a 90 degree angle in the corner, I use a 45 degree cut. Thanks, Tom _____ From: [email protected] [mailto:[email protected]] On Behalf Of Terry Klarich Sent: Wednesday, January 14, 2009 12:06 AM To: [email protected] Subject: Re: [BlindHandyMan] miter saw stops Hello all: I have a bosch b3915. It is a 10" sliding compound miter saw. The cool thing about it is the cast degree scale. And, yes, you can easily set up the saw by feel. Both the miter and bevel scales are raised. Stops are at 0, 15, 22.5 31.6 45 and 60. One of my woodworker buddies happened to run across this saw and thought I'd be able to feel the scales. Needless to say, He got several beers on my tab for that. The saw is made out of aluminum. I would rather have cast iron; but, I have to admit the aluminum has held up perfectly through many projects. It cuts as well as the day I baught it. Looks like this saw is still available. I've had mine for about 10 years or so. Here's the low-down: Features: Powerful 13.0 Amp motor, 2.8 max. tool HP Crown miter detents - 31.6° miter and 33.9° bevel detents for quick, accurate crown cuts Large 25" aluminum base with 3" extension for 28" total length - Provides extra support Tall 3-1/2" Fence - For easy bevel set-ups and increased crown molding cutting capacities Dual rail design - For superior accuracy Exclusive wedge-and-slot miter detent system - Consistent and precise miter angles Miter detent override - For easy setting of any setting for any neighboring angle Electric brake - For quick and repetitive cuts. Stops blade in seconds Cast and machined scales - Visible for the life of the saw Double insulated, UL listed, complies to OSHA Includes: 60 Tooth Carbide Tip Blade Workpiece Clamp Blade and Stop Wrench Fence and Base Wrench Directional Dust Chute Dust Bag B-3915 I hope this is helpful to the list. Terry [Non-text portions of this message have been removed] ------------------------------------ Send any questions regarding list management to: [email protected] To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/[email protected]/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [email protected]! Groups Links __________ NOD32 3773 (20090117) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com
