By Matt Weber
EZ Jointer Clamp with Swing Arm The E-Z Jointer Clamp Kit (Model 846) from General Tools & Instruments is an innovative alternative to expensive jointers. The latest version has the addition of an extendable swing-arm that supports extra-wide boards during table saw ripping operations. Use the Jointer Clamps to attach any boardno matter how crookedto a piece of straight stock, then run the stock along the rip fence to rip a matching straight cut along the crooked board. The Jointer Clamp works in two easy passes and is great for use with wide or long stock. It works on any table saw with a rip fence. Use the kit to rip crooked boards straight in two easy passes, salvaging damaged or imperfect stock. Visit www.generaltools.com <http://www.generaltools.com/> . Scribe with Your Router Walls and edges seldom fit squarely against a new countertop, cabinet or panel because of bends and bows in the surface. These obstructions require scribing the work to match the wall. The QuickScribe is a trim router accessory plate that attaches to several popular routers, including Bosch, DeWalt and Porter-Cable brands. These new accessories center the router's bit in a wheel that attaches via a plate to the bottom of the router, allowing the router to be used as an accurate scribing tool. The QuickScribe uses the non-marking and non-sticking wheel to glide freely against the wall or placement surface. The wheel keeps a constant distance of 1 inch from the wall to the cut. Inventor Bill Friegang explains the tool's inception: Basically, I'm a lazy guy. I don't like working that hard and I'm always looking for an easier way to do difficult, time-consuming jobs. The wheel follows the wall, guiding the router, while the router does the cutting for you. It saves quite a bit of time from the old method. This system eliminates the need of masking tape, scriber tools and belt sanders. When installing a large piece in a small room, this tool also saves the wall from possible scuffs, adds Friegang. It saves you from having to lift the piece out to whittle it down and then lift it to put it back in again. And with a precise fit, there is no need to caulk. Visit www.thescribingtool.com <http://www.thescribingtool.com/> . Grizzly Bandsaw with Motor Brake Grizzly Industrial introduced its new Model G0513X2B 17-inch bandsaw at IWF. The 2-horsepower, 220-volt single-phase motor features a built-in magnetic motor brake that stops the blade in less than 3 seconds for heightened safety. The heavy-duty table trunnion ensures the table remains extremely rigid, and the table extends for 23-5/8 by 17-1/4 inches of working space. The heavy-duty cast iron fence comes with a removable 6-inch aluminum resaw fence attachment. The computer-balanced cast iron wheels are decorated with Grizzly's trademark bear head cutouts and feature a lower wheel brush. Additional features include double upper and lower ball-bearing blade guides and a quick-release blade tensioner. Visit www.grizzly.com <http://www.grizzly.com/> . King of Parallel Clamps The new K Body Revo parallel clamp is a powerful solution to high-pressure clamping or spreading applications. This re-designed K Body clamp offers 30 percent more clamping surface and 25 percent more clamping force. The enhanced design also offers a new end rail clip, rail protection and many accessories. The large, flat parallel clamping surface is made of impact- and break-resistant polyamide, and comes with three replaceable pressure caps that are glue-, paint- and grease-resistant. The strong internal frame ensures accurate 90-degree angles that remain sturdy even at maximum pressure. The larger replaceable handle is made of a two-component composite with a soft plastic insert for comfort while working. The replaceable rail protection pieces elevate the workpiece from the rail to avoid glue buildup. Plus, the removable tail-piece ensures the clamp sits parallel to the rail, and can easily be removed and reversed on the sliding arm for use as a spreader. Available with openings from 12 to 98 inches, the K Body REVO offers 1,500 pounds of nominal clamping pressure. Visit www.besseytools.com <http://www.besseytools.com/> . New Jigsaws from Makita Hot off Makita's production line are the AVT Top Handle (4350FCT) and the AVT Barrel Grip (4351FCT) jigsaws. Both jig saws feature anti-vibration technology, along with a dynamically balanced motor for more than 40-percent reduced vibration and noise than competitive models. Both saws include three orbital settings plus a straight-cut setting, and are powered by a 6.3-amp motor for cutting all varieties of materials. The electronic variable speed control (800 to 2,800 SPM) maintains consistent speed throughout the cut for superior results. Makita also engineered comfort and control features into the new saws, such as an L.E.D. light that illuminates the line of cut, while a built-in dust blower clears the line of cut for greater visibility. The ergonomically designed rubberized grip on both grip models provides greater comfort and control. And the patented tool-less blade change system provides fast and easy installation and removal of Tang shank blades. The die-cast aluminum base adjusts up to 45 degrees right or left with a positive stop at 90 degrees. Visit www.makitausa.com <http://www.makitausa.com/> . Low Profile Sander for Better Control Porter-Cable unveiled its Low Profile Sanders (models 390K, 392 and 394) that feature new patent-pending Enduratech motor technology. Rated at 3 amps, the Enduratech motor uses brushless technology that reduces the number of wearable components by 71 percent, giving the motor 5 to 10 times longer life in testing compared to traditional palm-grip sander motors. Besides increased durability, the Low Profile Sanders feature two innovations for improved performance: electronic load control and electronic motor braking. Electronic load control helps maintain pad speed by increasing power under load conditions, removing material up to 42 percent faster than traditional random orbit sanders. The electronic motor braking stops the sander almost immediately, so the user can safely set the sander down without waiting for the pad to stop. As for its unique shape, Porter-Cable borrowed from the low profile design of pneumatic sanders to reduce the tool's overall height. The lowered center of gravity places the user's hand 31 percent closer to the material being sanded for better control and a smoother finish. Visit www.deltaportercable.com <http://www.deltaportercable.com/> . Rout a Roll-top desk Amana Tool offers some new specialty router bits that let you cut the components to create a custom roll-top desk. Lonnie Bird's Tambour/Appliance Garage Door <http://www.extremehowto.com/xh/article.asp?article_id=60744> http://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif Bits is a three-piece router bit set designed for creating tambours without the need for wires, canvas or glue. The unique patent-pending design shapes slats that interlock. Assembly is easy. Simply slide the slats together to create a beautiful, flexible tambour that's perfect for creating not only roll-top desks, but breadboxes or kitchen countertop <http://www.extremehowto.com/xh/article.asp?article_id=60744> http://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif storage areas. Each slat measures approximately ½ -by-1-inch, and the minimum radius for the tambour door is 3-1/2 inch. Visit www.amantool.com <http://www.amantool.com/> . New Pro-grade Bits from Trend Trend Routing Technology launched a new range of professional router bits, including 96 of their most popular tungsten carbide-tipped (TCT) cutters for use with plunge-style and fixed-base routers. The TCT engineering gives the bits extra long life and an anti-kickback design. The range of bits includes straights, trimmers, shaped, panel bits, dovetail and jointing tools. There is also a kitchen countertop routing pack. The professional range of bits is packaged in reusable storage tubes and is aimed at both the contractor and the hobbyist. Visit www.trend-usa.com <http://www.trend-usa.com/> . X Marks the Spot with Jet Drill Press There's no question that a free-standing drill press is a shop asset when it comes to accurate drilling. The new Jet 17-inch Drill Press features an innovative cross-point laser. Mounted to the head, the AC-powered dual laser guide provides pinpoint accuracy with a visual crosshairs indication on exactly where the bit enters the workpiece. The laser operates from its own on/off switch located on the power head. In addition to the laser, the drill press has its own work light to illuminate the work area. The multi-featured drill press features an extra-large 14-by-18-inch cast iron work table with two T-slots to accept jigs and other accessories. The table also has an integrated ledge that surrounds the tabletop to support clamping operations. A replaceable MDF center insert is also included. Powered by a 9-amp, 3/4-horsepower, single-phase, 115-volt motor, this new freestanding drill press offers 16 speeds from 200 to 3,620 rpm for drilling or sanding a variety of materials, including wood, fiberglass, PVC and metals. Visit www.jettools.com <http://www.jettools.com/> [Non-text portions of this message have been removed]
