Good to know, the local locksmiths have never charged me for that service 
when I purchased the lockset from them.
----- Original Message ----- 
From: "Bob Kennedy" <[email protected]>
To: <[email protected]>
Sent: Monday, February 23, 2009 8:04 AM
Subject: Re: [BlindHandyMan] door nob question


They'll do that at Lowes or Home Depot as well.  Depending on the person 
working the desk, some will do it for free, and the rest of the time it's 
about $10 per lock.
  ----- Original Message ----- 
  From: Lenny McHugh
  To: [email protected]
  Sent: Monday, February 23, 2009 7:50 AM
  Subject: Re: [BlindHandyMan] door nob question


  For the replacement set consider going to a locksmith to purchase the new
  set. Most will then re-key it to match your house key. I have one key that
  opens every door.
  ----- Original Message ----- 
  From: "Bob Kennedy" <[email protected]>
  To: <[email protected]>
  Sent: Monday, February 23, 2009 5:49 AM
  Subject: Re: [BlindHandyMan] door nob question

  A door handle that locks is the same as one that doesn't. Basically the
  locking set will have 3 working parts along with a couple strike plates 
and
  some keys and screws.

  Remove the old handle by backing out the 2 Philips screws on the room 
side.
  Once the screws are out pull the knob to you and it should come right out.
  You may have to shake it a little but it is loose now.

  Next pull the other knob out of the striker assembly. The strike assembly
  has 2 short Philips in it on the edge of the door. Take them out and pull
  the assembly out. It's often easiest to get hold of the lever from inside
  the opening where the knobs came off.

  When you go for the replacement set, make sure to know how thick the door
  is. It can make a difference.

  To install, put the strike lever in first, followed by the knob with the 
key
  set in it. That half of the knob has to go in first

  Finally the knob with the twisting lock in it. This can cause you to 
preach
  a sermon sometimes because the rod from the lock has to line up with the
  part that twists. The rod has a flat side to it, and I don't think you can
  touch the part that twists to see how it is lined up. I know my fingers 
are
  too big.

  What you can do is fit them together before putting either one in the door
  to see what direction they line up. Use that as a reference for the final
  step. Now put in the 2 long Philips screws and try it out.

  ----- Original Message ----- 
  From: Kevin Doucet
  To: [email protected]
  Sent: Sunday, February 22, 2009 10:24 PM
  Subject: [BlindHandyMan] door nob question

  Hi list,

  I want to secure the master bed room as this is the room I want to
  keep my fire arms collection in while I have a gathering. What is
  involved in removing the current door nob and replacing it with a
  door nob with a key lock?

  Thanks

  Kevin Doucet
  [email protected]

  confuse as says

  Blind man with unmarked forehead has large belly!

  [Non-text portions of this message have been removed]

  ------------------------------------

  Send any questions regarding list management to:
  [email protected]
  To listen to the show archives go to link
  
http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29
  Or
  ftp://ftp.acbradio.org/acbradio-archives/handyman/

  The Pod Cast address for the Blind Handy Man Show is.
  http://www.acbradio.org/news/xml/podcast.php?pgm=saturday

  Visit The Blind Handy Man Files Page To Review Contributions From Various
  List Members At The Following address:
  http://www.jaws-users.com/JAWS/handyman/

  Visit the archives page at the following address
  http://www.mail-archive.com/[email protected]/

  If you would like to join the JAWS Users List, then visit the following
  address for more information:
  http://www.jaws-users.com/
  For a complete list of email commands pertaining to the Blind Handy Man 
list
  just send a blank message to:
  [email protected]! Groups Links

  __________ NOD32 3881 (20090223) Information __________

  This message was checked by NOD32 antivirus system.
  http://www.eset.com




[Non-text portions of this message have been removed]



------------------------------------

Send any questions regarding list management to:
[email protected]
To listen to the show archives go to link
http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29
Or
ftp://ftp.acbradio.org/acbradio-archives/handyman/

The Pod Cast address for the Blind Handy Man Show is.
http://www.acbradio.org/news/xml/podcast.php?pgm=saturday

Visit The Blind Handy Man Files Page To Review Contributions From Various 
List Members At The Following address:
http://www.jaws-users.com/JAWS/handyman/

Visit the archives page at the following address
http://www.mail-archive.com/[email protected]/

If you would like to join the JAWS Users List, then visit the following 
address for more information:
http://www.jaws-users.com/
For a complete list of email commands pertaining to the Blind Handy Man list 
just send a blank message to:
[email protected]! Groups Links




__________ NOD32 3881 (20090223) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com


Reply via email to