Glad you pointed out what I forgot to say.  Didn't want my message to be a 
total downer but I think this could append to the beginning with a line that 
says "If you still want to try this"

And if the line crumbles before it goes into the wall, count yourself blessed.  
Many times as I put one in for someone it breaks inside the T inside the wall.  
You become real popular when you tell them, you didn't know that would happen 
and they'll have to put out a bit more money so the bad pieces can be replaced. 
 

When I remodeled my place in Charlotte last summer, I pulled the disposal out 
because I didn't want them calling me saying they don't know what happened but 
it doesn't work.  We're not paying the rent until it works again.  Last time it 
caused a problem some idiot dropped a fork into it while running and it got 
bent around and lodged,, locking it up tight.

At Sears, people kept their "MPA" in place and instead of fixing them, Sears 
just replaced them.  Before I left I knew of 2 customers that had models from 
1990 and they had paid insurance all those years.  But that's worth replacing 
after you pay for 18 years on something that only costs $150...


  ----- Original Message ----- 
  From: Dan Rossi 
  To: [email protected] 
  Sent: Friday, April 10, 2009 9:25 AM
  Subject: Re: [BlindHandyMan] garbage disposal





  The one thing you will need the most of is patience. If you manage to 
  pull off the installation with less than three trips to the hardware 
  store, you are lucky. You will find that none of the pieces of pipe that 
  you have, or that came in the kit, will line up, or are the same size, as 
  what is currently under your sink. The ancient piece of crumbling pipe 
  that disappears into the wall and into the stack, will defy all attempts 
  to accept a fitting and will begin to crumble in your hand as you try. 
  You will smash the back of your head on the cabinet frame at least twice 
  as you are reaching in and out. You will wish for a third hand as you try 
  to lift the disposal into place and try and line it up with the flange.

  Other than that, it is a piece of cake.

  -- 
  Blue skies.
  Dan Rossi
  Carnegie Mellon University.
  E-Mail: [email protected]
  Tel: (412) 268-9081


  

[Non-text portions of this message have been removed]

Reply via email to