yes thair is it's used buy people building moddle aircraft to fly ----- Original Message ----- From: Lee A. Stone To: [email protected] Sent: Monday, May 11, 2009 6:27 PM Subject: Re: [BlindHandyMan] toy boat
is there such a thing as balsa wod for toy projects anymore/ ? Lee On Mon, May 11, 2009 at 12:12:31PM -0500, [email protected] wrote: > > Lenny: > > I can recall as a kid building something similar, though not as elaborate. The ones me and my old man built didn't have shafts for the prop, and the boat was just a piece of pine with a point on one end. They worked though. I also used to build scooters made out of a piece of 1 x 6 with roller skates I stole from my sister on each end. These had a wooden crate on the front with handles, and they roared like a jet when you rode them on the sidewalk. Probably they're too dangerous for today's little darlings,. > > Bill Stephan > Kansas Citty MO > Email: [email protected] > Phone: (816)803-2469 > > > ----- Original Message ----- > From: "Lee A. Stone" <[email protected]> > Date: Monday, May 11, 2009 11:39 am > Subject: Re: [BlindHandyMan] toy boat > > > > i think that is a great program to get kids involved into > > making > > things. Lee > > > > On Mon, May 11, 2009 at 11:21:15AM -0400, > > Lenny McHugh wrote: > > > Well I had an interesting weekend with my grandson, Christian > > age 12. For a > > > school project he wanted to build a boat out of scrap wood. This > > is for a > > > craft trade program where kids make something then trade for > > something that > > > another kid has made. He had permission to have an adult use > > power saws. > > > Christian can use a coping saw better than most adults. We > > talked a little > > > about the design and he had a few books. I suggested that he > > make a rubber > > > band powered boat and that is what he finally decided. > > > I first took a piece of 1x6 pine and cut a point on the one end. > > In the back > > > he cut out a part 1 1/4 inch wide and 2 1/2 inches long. > > > He then used a mallet and chisels to cut two notches a 1/2 inch > > long and 3/8 > > > inch wide and deep for the motor. > > > I cut a thin piece of wood a little over 1/8 thick 3/4 inch wide > > and about 4 > > > inches long. > > > I then had Christian take a wood rasp or file to make a spot to > > hold the > > > paddle halfway in the 3/8 dowel rod. When the paddle was glued > > in place he > > > cut the rod to fit in the grooves that he chiseled in the back > > of the boat. > > > I then left him use my bench sander to round all of the points > > around the > > > boat. When he was ready to put the paddle in place I gave him > > two electric > > > cable straps and some small screws to put over the top of the > > dowel rods to > > > keep them in place. He then inserted two screw hooks right in > > from of the > > > paddle. Now a rubber band would be placed over the hooks and > > around part of > > > the paddle. By winding it a few turns when released it gave a > > pretty good > > > spin to the paddle. > > > I then cut a strip that he would glue to the bottom to make a > > rudder. Again > > > he used the sander to shape the front of the strip and glued it > > in place. > > > I took a small piece of 2x4 and using the chop saw made the top > > of the boat. > > > He then used the drill press to drill a 1 1/4 hole to hold a > > medicine > > > container. This will both represent a smoke stack and hold a lot > > of extra > > > rubber bands. > > > He got to use quite a few tools. A bench sander, drill press, > > hand drill, > > > coping saw, wood rasp, wood chisels and a mallet and a sanding > > block. He is > > > quite proud of the boat. He now has to paint it and have it > > ready for next > > > week. > > > Christian, like me, also has RP. I want him to learn to use as > > many tools as > > > he can while he has some vision. We have become very close and > > projects like > > > this are wonderful. > > > --- > > > Please visit my home page; it is motivational, inspirational and > > humorous > > > with many resources for the blind. > > > http://www.geocities.com/lenny_mchugh/ > > > Lenny > > > > > > > > > > > > ------------------------------------ > > > > > > Send any questions regarding list management to: > > > [email protected] > > > To listen to the show archives go to link > > > > > http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29> Or > > > ftp://ftp.acbradio.org/acbradio-archives/handyman/ > > > > > > The Pod Cast address for the Blind Handy Man Show is. > > > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > > > > > > Visit The Blind Handy Man Files Page To Review Contributions > > From Various List Members At The Following address: > > > http://www.jaws-users.com/JAWS/handyman/ > > > > > > Visit the archives page at the following address > > > http://www.mail-archive.com/[email protected]/ > > > > > > If you would like to join the JAWS Users List, then visit the > > following address for more information: > > > http://www.jaws-users.com/ > > > For a complete list of email commands pertaining to the Blind > > Handy Man list just send a blank message to: > > > [email protected]! Groups Links > > > > > > > > > > > > > -- > > "When you wake up in the morning, Pooh," said Piglet at last, > > "what's the first thing you say to yourself?" > > "What's for breakfast?" said Pooh. "What do you say, Piglet?" > > "I say, I wonder what's going to happen exciting today?" said Piglet. > > Pooh nodded thoughtfully. "It's the same thing," he said. > > Are you curious? Ask me about Temptations toy parties. > > -- "When you wake up in the morning, Pooh," said Piglet at last, "what's the first thing you say to yourself?" "What's for breakfast?" said Pooh. "What do you say, Piglet?" "I say, I wonder what's going to happen exciting today?" said Piglet. Pooh nodded thoughtfully. "It's the same thing," he said. Are you curious? Ask me about Temptations toy parties. [Non-text portions of this message have been removed]
