Probably nothing to worry about. Is this for bonding something?
I have heard nasty stories, one about a baby sitter who sat on a toilet seat which had been painted with d paint which had not fully cured and remained stuck there. I don't believe it was probably true though, who would leave something like that unprotected in a home with kids after all. The epoxy resins used in fiber glass can be very sticky at certain points in the curing and if you get it on yourself you pretty well have to wear it off. Generally it cures best at about 21C. There are special formulations for other temperatures and you can adjust that by how much catalyst you put in when you mix it. If working in cooler conditions add a little more. Be aware though that if you add too much it will cure rapidly and get pretty warm. It can get so hot as to spontaneously combust but you need to be using a lot of it as for example glassing the bottom of a boat. I can't think of any other issues. The fumes aren't particularly bad but not pleasant. Good luck. ----- Original Message ----- From: carl To: [email protected] Sent: Monday, August 17, 2009 8:18 PM Subject: [BlindHandyMan] a produckt safty question i'm thinking of useing apoxy rezen for a job is thair anything i need to bee awair of? [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
