sounds like great stuff. Thanks for this. Is it specific to vinyl, or a small group of materials? I ask as nothing else seemed to do the trick in your examinations. Is the standard Acetone the solvent for this, or is there a specific Brand named solution? Also, what are the steps of use? Is it a 2 part? Is it a "part cure" as some, beofore placing the parts together? Thanks
On Tue, 8 Sep 2009, Edward Przybylek wrote: > Hi all, > > > > I finally found a glue that does a good job gluing solid nylon. It?s called > Surehold Plastic Surgery. I took two pieces of nylong ? by ? by 6 inches > and glued them together to see how well Plastic Surgery would bond the two > pieces together. After gluing them together, I put the result in my freezer > for several days. Every now and then I took the piece out of the freezer > and flexed it in all directions. The bond didn?t fail. I then put the > piece on my blacktop driveway and left it there for 5 days. We?ve had some > very warm days lately and the driveway got quite hot. Again, I flexed the > piece to test the bond. It held with no problems. At this point, I?m quite > sure the glue will work for building the clips I need to repair the siding > on my house. I?ll have the clips done by the end of the week and will be > installing them next week. I have no doubts that the clips will hold up > just fine. Do be careful, though, if you ever decide to play with Plastic > Surgery. I got some on my fingers when working with it and it took the > entire day before I was able to peel it off my skin. Luckily, I didn?t > press any of my fingers together or I?m quite sure I would have glued them > together. I highly recommend the stuff. > > > > Take care, > > Ed Przybylek > > > > > > [Non-text portions of this message have been removed] > >
