I saw someone use it for cutting out holes in the ceiling drywall. It worked well, because he was able to let the Roto Zip run along the metal ring of the recessed ceiling light he was putting in. But it seems it would have limited use. Blessings, Tom -----Original Message----- From: [email protected] [mailto:[email protected]]on Behalf Of Carl Sent: Tuesday, January 05, 2010 1:19 PM To: [email protected] Subject: Re: [BlindHandyMan] roto zip
cud'nt you use it like a router in that hav a pin on the side foloing an outline for makeing shapes? ----- Original Message ----- From: William Stephan To: [email protected] Sent: Tuesday, January 05, 2010 7:10 PM Subject: RE: [BlindHandyMan] roto zip If you had enough eyesight to follow an outline, a rotozip would probably be fine. If not, it's not practical. The blades are not like drill bits, they're very sharp, and you can seriously mangle your fingers if they come into contact with the blade while it's spinning. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Carl Sent: Tuesday, January 05, 2010 07:18 To: David Greenwood; [email protected] Subject: [BlindHandyMan] roto zip hav any of you chaps had a play with a roto zip or spiral saw? how do thay handle? are thay manlie for cutting thin sheets like ply? [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
