You didn't mention if it is looser at the top connection or the bottom front. Regardless it will likely require removing some of the leather. Not total just one or two edges and folding back. Some arms are held on with a carriage bolt with the nut on the inside of the chair. Some are held on with screws through the arm and then into the sides of the chair. See if you can remove the staples under the arm enough to fold the outer leather back up to see if you are dealing with a carriage bolt smooth head or a screwdriver flat head. I have saw straight slotted, phillips and the newer have star, Torex. If it is smooth as in a carriage bolt head then the back first has to be removed. There are two latches, one on each side of the back. They are metal about 8 inches from the bottom of the back. If I remember right they need to be rotated up or counterclockwise. Then the back can be pulled straight off the two prong like metal brackets. The bracket is then removed and then the fabric, leather. Again by removaling staples and folded back until the holding nut can be found and tightened. If it is the lower front you might be able to remove staples under the chair and folding back, but more likely the seat will need removing. It is held on the metal mechanism with four to eight machine screws. Once the seat is removed then you should be able to remove fabric and fold enough back.. Note there is many times a flap from the back to the bottom and lower back that may need to be removed to facalitate back and seat removal. Hope you are lucky and can find screw heads from the outside by just folding the arm cover up. Opps forgot if the side cover comes clear up under the arm you usually have to remove that side to gain access to the underside of the arm. Sorry there just isn't a easy fix. Kind of like auto work you have to remove half the car to change the spark plugs. Ron ----- Original Message ----- From: Carl To: blindhandyman@yahoogroups.com Sent: Thursday, February 18, 2010 5:25 AM Subject: [BlindHandyMan] an interesting problem
ok foalks i hav a leather recliner sofa the arm rest one one side is luse and wobbles from side to side. how can i tighten it up? i hav looked under neath and from the back and carn't see any way to sort the problem? [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]