That's correct. I have really looked. I was able to turn it with a wrench in the bottom, but it is extremely stiff. And yes, I pushed the reset button. It just hums. Betsy At 12:53 PM 3/23/2010, you wrote: > > >Betsy, > >I am late to this thread, so forgive if I revisit issues. > >Do I understand you find nothing in the disposal blocking it? > >At 07:37 PM 3/22/2010, you wrote: > > > > > >Aloha all, > >I did get hold of a wrench to turn the disposal > >from the bottom and it does turn but it almost > >takes 3 men and a baby to move it. It didn't get > >any easier after turning it several times. > > > >RJ, where would I put the socket to turn it from the top? > >Betsy > >At 12:48 PM 3/22/2010, you wrote: > > > > > > > > >Get a socket wrench and turn it from the top. > > > > > >----- Original Message ----- > > >From: Betsy Whitney, Dolphin Press > > >To: > <mailto:blindhandyman%40yahoogroups.com><mailto:blindhandyman%40yahoogroups.com>[email protected] > > >Sent: Sunday, March 21, 2010 23:33 > > >Subject: Re: [BlindHandyMan] Garbage disposal > > > > > >There doesn't seem to be anything caught in > > >anything. The hatchet-head looking things turn > > >freely. I'll get a wrench tomorrow to see if > I can turn it from the bottom. > > >Betsy > > >At 06:24 AM 3/21/2010, you wrote: > > > > > > > > > > > >Hi, > > > > > > > >Those blades are to turn without resistant. They > > > >direct the food into the cutters. I would bet > > > >you will have to loosen the material that is > > > >caught in the cutters. U can use a wrench that > > > >came with the unit or use a socket that fits the > > > >nut inside the unit. by placing it in the > > > >insides of the unit. I believe the nut should be turned clockwise. > > > >RJ > > > > > > > >[Non-text portions of this message have been removed] > > > > > > > > > > > > > >[Non-text portions of this message have been removed] > > > > > >[Non-text portions of this message have been removed] > > > > > > > > > >[Non-text portions of this message have been removed] > > > > > >[Non-text portions of this message have been removed] > >
[Non-text portions of this message have been removed]
