You know all this talk of chainsaws makes me wonder what is the best way to use one. I realize what makes them dangerous is the fact there is this chain that is buzzing along at a pretty good clip and something could cause it to snap at you. The problem is the bite is quite bad from what I hear. I imagine using the tip of the bar to cut is not a good idea as the saw could flip up or down and take off your nose or leg. grin However, being serious, I assume to prevent as many potential kickback situations, it is best to place the saw so whatever your cutting is as close to the motor as possible. Would that be correct and are there other tips? Is it best to cut so the saw is turned on its side instead of standing vertical? Maybe I should state it in this way. SHould the chain run always be held perpendicular to the work? I tried a chainsaw once, but for a very short time since there was a problem with it and I could not resolve the problem. I just took it back and used the handy handsaw. Well I have a tree that will require more than a handsaw. grin
On Apr 6, 2010, at 6:57 PM, John Sherrer wrote: > I have an Echo 650, a two cyclinder model that does not vibrate. You can use > it all day without your hands numbing out on you. It is two big for your job > unless you have future use. > If you are close enough to power, an electric would be ideal. If this is your > only job, or chanin saw use will be rare, buy a cheap one. If you want a good > one, the Shindowa worm gear electric is good. > > If you live close to North Carolina, I would want to take the wood off your > hands. > > By the way, I have not had the guts to use my Echo in several years. But if I > had a good enough reason, I would use it. > > John > http://WhiteCane.org > http://BlindWoodWorker.com > http://HolyTeaClub.comcom\whitecane > http://anellos.ws > > ----- Original Message ----- > From: RJ > To: [email protected] > Sent: Sunday, April 04, 2010 9:15 PM > Subject: Re: [BlindHandyMan] chain saw > > If you don't want to use a chain saw, a bucksaw or cross saw does the job > nicely with a little elbow grease. A electric chain saw would work well, if > close to a outlet. A small gas chain saw of 12 inches is easy to handle. > RJ > ----- Original Message ----- > From: Scott Berry > To: [email protected] > Sent: Sunday, April 04, 2010 13:05 > Subject: [BlindHandyMan] chain saw > > Hello there, > > I have some trees which are approximately 12 to 14 feet and 3 inches in > diameter. These are wild plumb trees. What type and make of chain saw do > you recommend. > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] ------------------------------------ Send any questions regarding list management to: [email protected] To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/[email protected]/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [email protected]! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/blindhandyman/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
