That is a good routine for compressor maintenance.  I don't drain it every time 
I use it, but that is sure better than never doing it.  

Leaving the condensation in the compressor will let the level of water rise 
until it begins to mix with the compressed air and eventually the tools will 
begin to corrode inside.  

If you have ever looked at a body shop, the compressor there will have a series 
of water separators built into the lines.  Starting at the compressor and 
depending on the amount of trouble they have with moisture, there may be one at 
each work station.  Certainly inside the spray booth.




  ----- Original Message ----- 
  From: Agent086b 
  To: blindhandyman@yahoogroups.com 
  Sent: Sunday, May 09, 2010 6:45 PM
  Subject: Re: [BlindHandyMan] using an air nailer and an air compressor


    

  Hi,
  do I take it you don't drain the condensation out of the compressor?
  I have been doing this every time I turn it off. Not sure if this is 
  necessary but a lot of water comes out at times.
  Max.
  On 10/05/2010 08:15, Phil Parr wrote:
  > I have had an air compressor for a while now and never had any trouble 
using my nail guns. I have three, a framing gun what they call a brad gun and a 
middle size one. If the gun is not shooting hard enough tern up the pressure 
some. I also have many other pneumatic tools and just connect them and go. In 
fact, when I built my shop I ran p v c pipe thru the wall and put my compressor 
in another room so it wouldn't be so noisy. I just have a switch to tern it on 
and off in the shop, I never see the regulator at all.
  >
  > Phil Parr.
  >
  > [Non-text portions of this message have been removed]
  >
  >
  >
  > ------------------------------------
  >
  > Send any questions regarding list management to:
  > blindhandyman-ow...@yahoogroups.com
  > To listen to the show archives go to link
  > 
http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29
  > Or
  > ftp://ftp.acbradio.org/acbradio-archives/handyman/
  >
  > The Pod Cast address for the Blind Handy Man Show is.
  > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday
  >
  > Visit The Blind Handy Man Files Page To Review Contributions From Various 
List Members At The Following address:
  > http://www.jaws-users.com/JAWS/handyman/
  >
  > Visit the archives page at the following address
  > http://www.mail-archive.com/blindhandyman@yahoogroups.com/
  >
  > If you would like to join the JAWS Users List, then visit the following 
address for more information:
  > http://www.jaws-users.com/
  > For a complete list of email commands pertaining to the Blind Handy Man 
list just send a blank message to:
  > blindhandyman-h...@yahoogroups.comyahoo! Groups Links
  >
  >
  >
  >


  

[Non-text portions of this message have been removed]

Reply via email to