To find out the ports used for SIP TCP and TLS fro a given domain your device 
must perform the following DNS lookups:

dig NAPTR naptr sip2sip.info
sip2sip.info.           3599    IN      NAPTR   15 100 "s" "SIPS+D2T" "" 
_sips._tcp.sip2sip.info.


dig SRV _sips._tcp.sip2sip.info.
_sips._tcp.sip2sip.info. 299    IN      SRV     100 10 443 proxy.sipthor.net.

The port used for TLS at this moment is 443 but it may change at any time.


Regards,
Adrian


> On 16 Dec 2019, at 15:27, Michael Nagie <promike1...@gmail.com> wrote:
> 
> Hello,
> I need a little help.
> I've been unable to connect to sip2sip.info via TLS with my Cisco 
> SPA504G device for a couple of days now.
> 
> sip2sip.info status says: all systems operational
> yet I can't establish a secure connection.
> 
> If I choose TCP transport protocol then it can connect otherwise with 
> TLS it says 'Failed - Not Reachable'
> 
> Here's my configuration, it's pretty basic, I didn't change much:
> 
> General
> Line Enable:  yes
> 
> Share Line Appearance
> Share Ext: private                    Shared User ID:         
> Subscription Expires: 3600    Restrict MWI: no        
> Monitor User ID:              SCA Unseize Delay: 0
> 
> NAT Settings
> NAT Mapping Enable: no        NAT Keep Alive Enable:  no      
> NAT Keep Alive Msg: $NOTIFY     NAT Keep Alive Dest: $PROXY
> 
> Network Settings
> SIP TOS/DiffServ Value: 0x68    SIP CoS Value: 3
> RTP TOS/DiffServ Value: 0xb8    RTP CoS Value: 6
> Network Jitter Level: high      Jitter Buffer Adjustment: up and down         
> 
> SIP Settings
> SIP Transport: TLS            SIP Port: 5060
> SIP 100REL Enable: no                 EXT SIP Port:           
> Auth Resync-Reboot: yes               SIP Proxy-Require:      
> SIP Remote-Party-ID: no               Referor Bye Delay: 4
> Refer-To Target Contact: no   Referee Bye Delay: 0
> SIP Debug Option: none                Refer Target Bye Delay: 0
> Sticky 183: no                Auth INVITE: no
> Ntfy Refer On 1xx-To-Inv: yes Use Anonymous With RPID: yes    
> Set G729 annexb: none                 Voice Quality Report Address:    
> User Equal Phone: no                          
> 
> Call Feature Settings
> Blind Attn-Xfer Enable: no    MOH Server:     
> Message Waiting: no                   Auth Page: no
> Default Ring: 1               Auth Page Realm:        
> Conference Bridge URL:          Auth Page Password:           
> Mailbox ID:                           Voice Mail Server:      
> Voice Mail Subscribe Interval:  86400   State Agent:          
> CFWD Notify Serv: no                  CFWD Notifier:          
> User ID with Domain: no               Broadsoft ACD: no       
> Auto Ans Page On Active Call: yes Feature Key Sync: no
> HuaWei SBC: yes               Call Park Monitor Enable: yes   
> Enable Broadsoft Hoteling: no Hoteling Sbscrpton Expirs:3600
> 
> Proxy and Registration
> Proxy: sip2sip.info
> Outbound Proxy:       
> Alternate Proxy:      
> Alternate Outbound Proxy:0
> Use Outbound Proxy: no                Use OB Proxy In Dialog: yes
> Register: yes                         Make Call Without Reg: no       
> Register Expires: 3600          Ans Call Without Reg: no      
> Use DNS SRV: yes              DNS SRV Auto Prefix: yes        
> Proxy Fallback Intvl: 3600      Proxy Redundancy Method:normal   
> Dual Registration: no                 Auto Register When Failover:no  
> 
> Subscriber Information
> Display Name: My Name           User ID: user_id
> Password: ****                  Use Auth ID: no
> Auth ID: user_id                Reversed Auth Realm:          
> Mini Certificate:     
> SRTP Private Key:     
> Resident Online Number:         SIP URI:      
> 
> Audio Configuration
> Preferred Codec:  G722        Use Pref Codec Only: no         
> Second Preferred Codec: Unspecified Third Prfrrd Codc:Unspcfd    
> G711u Enable: yes                     G711a Enable: yes
> G729a Enable: yes             G722 Enable: yes        
> G726-16 Enable: yes                   G726-24 Enable: yes     
> G726-32 Enable: yes                   G726-40 Enable: yes     
> Release Unused Codec: yes     DTMF Process AVT: yes
> Silence Supp Enable: yes      DTMF Tx Method: Auto
> DTMF Tx Volume for AVT Packet:0 DTMF AVT Packet Interval:0
> Use Remote Pref Codec: no     Codec Negotiation: Default      
> Rx Payload In 18x Media Session: Use Local SDP                        
> Dial Plan
> Dial Plan:            
> (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)
> Caller ID Map:        
> Enable IP Dialing: yes                Emergency Number:    
> 
> 
> -- 
> Best Regards,
> 
> Michael Nagie
> e: promike1...@gmail.com
> _______________________________________________
> Blink mailing list
> Blink@lists.ag-projects.com
> https://lists.ag-projects.com/mailman/listinfo/blink
> 

_______________________________________________
Blink mailing list
Blink@lists.ag-projects.com
https://lists.ag-projects.com/mailman/listinfo/blink

Reply via email to