Hi Didier,

-speed=2 did the trick.  Slower burn with no errors!

On Sun, 4 Feb 2018, Linux for blind general discussion wrote:

Date: Sun, 4 Feb 2018 13:50:30
From: Linux for blind general discussion <blinux-list@redhat.com>
To: Linux for blind general discussion <blinux-list@redhat.com>
Subject: Re: growisofs dvd burn

Okay, the speed growisofs tried to use originally was 16.4 and it ended up using an average of 10.4 so I'll try -speed=2 and see if those errors go away. Only reason I'm using growisofs is because cdrecord returns a warning to the effect of DMA test skipped and that didn't happen with growisofs. One of these days I'll find the optimum burning speed for this drive.

On Sun, 4 Feb 2018, Linux for blind general discussion wrote:

 Date: Sun, 4 Feb 2018 12:55:55
 From: Linux for blind general discussion <blinux-list@redhat.com>
 To: Linux for blind general discussion <blinux-list@redhat.com>
 Subject: Re: growisofs dvd burn

 Hi,

 Le 04/02/2018 ? 18:40, Linux for blind general discussion a ?crit?:
 I burnt a dvd with growisofs and got async and print req errors.? No
 errors are documented along with descriptions in the growisofs man page
 so I'm wondering if the dvd I used to do the burn is defective.

 Or maybe you could try at a lower speed. Something like this:

 growisofs -speed=2 -dvd-compat -Z /dev/sr0=your_iso_image.iso

 Greetings,

 Didier Spaier

 _______________________________________________
 Blinux-list mailing list
 Blinux-list@redhat.com
 https://www.redhat.com/mailman/listinfo/blinux-list



--

_______________________________________________
Blinux-list mailing list
Blinux-list@redhat.com
https://www.redhat.com/mailman/listinfo/blinux-list

Reply via email to