> On 26 May, 2020, at 12:47 pm, Jose Blanquicet <[email protected]> wrote:
>
> We have an embedded system with limited CPU resources that acts as
> gateway to provide Internet access from LTE to a private Wi-Fi
> network. Our problem is that the bandwidth on LTE and Wi-Fi links is
> higher than what the system is able to handle thus it reaches 100% of
> CPU load when we perform a simple speed test from a device connected
> to our Wi-Fi Hotspot.
>
> Therefore, we want to limit the bandwidth to avoid system gets
> saturated is such use-case. To do so, we thought to use the QDISC-TBF
> on the Wi-Fi interface. For instance, to have 10Mbps:
>
> tc qdisc add dev wlan0 root tbf rate 10mbit burst 12500b latency 50ms
>
> It worked correctly and maximum rate was limited to 10Mbps. However,
> we noticed that the CPU load added by the TBF was not negligible for
> our system.
Just how limited is the CPU on this device? I have successfully shaped at
several tens of Mbps on a Pentium-MMX, where the limiting factor may have been
the PCI bus rather than the CPU itself.
Assuming your CPU is of that order of capability, I would suggest installing
Cake using the out-of-tree build process, and the latest stable version of the
iproute2 tools to configure it. Start with:
git clone https://github.com/dtaht/sch_cake.git
This provides a more efficient and more effective shaper than TBF, and a more
effective AQM than a policer, and good flow-isolation properties, all in a
single bundle that will be more efficient than running two separate components.
Once installed, the following should set it up nicely for you:
tc qdisc replace dev wlan0 root cake bandwidth 10Mbit besteffort flows
ack-filter
Cake is considered quite a heavyweight solution, but very effective. If it
doesn't work well for this particular use case, it may be feasible to backport
some more recent work which takes a simpler approach, though along similar
lines.
- Jonathan Morton
_______________________________________________
Bloat mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/bloat
