I can telnt but not SSH in the internal network.
----- Original Message -----
From: T. K. Hughes
To: BlueOnyx General Mailing List
Sent: Wednesday, August 12, 2009 3:37 PM
Subject: Re: [BlueOnyx:02063] Re: Can not login SSH in local network
sorry for last post. wrong command. I get a lot of info that will not stop
moving on both eth0 and eth1. Everything looks fine.
----- Original Message -----
From: Michael Stauber
To: BlueOnyx General Mailing List
Sent: Wednesday, August 12, 2009 3:24 PM
Subject: [BlueOnyx:02063] Re: Can not login SSH in local network
Hi Tommy,
> I can login fine outside the network with any user/pass. I can not login
> in network for some reason. Under The GUI I can not get a login screen.
I
> get a error box.
OK, so it's neither pam_abl or a firewall. Can you ping the servers
internal
IP from your internal network?
Or can you ping from the server to an IP in your internal network?
If you use "eth1" on the server to hook the box up with the internal
network
and use "eth0" for the hookup with the internet, then you might want to
check
if "eth1" is active and configured correctly.
If it is, run "tcpdump -i eth1 -n" to see if it show *any* network activity
at
all.
If nothing shows even after a while, then it could still be some config or
routing issue, a bad NIC, bad switchport, loose network cable and a few
other
things.
--
With best regards
Michael Stauber_______________________________________________
Blueonyx mailing list
[email protected]
http://www.blueonyx.it/mailman/listinfo/blueonyx
