Lew;
THANKS!.. This worked out GREAT and all is back on line and working..
Hard to explain what I was in trouble with I guess, but seems there were
multiple NIC’s
that weren’t there after switching machines..
THANKS AGAIN!
Jeff-N8NOE
Message: 1
Date: Sat, 22 Feb 2014 19:02:51 +0000
From: Lew Berry <[email protected]>
Subject: [BlueOnyx:14734] Re: MAC Address question?
To: BlueOnyx General Mailing List <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset="us-ascii"
Jeffery
I think the problem may be more that the NIC in the new box is eth1 not eth0
but the system is trying to load on the eth0 from the old box. I had the same
problem when a NIC had to be replaced. If you edit the file
"70-persistent-net.rules" to remove the old eth0 card line and also remove the
new eth1 line:
vi /etc/udev/rules.d/70-persistent-net.rules
Then you just need to reboot and the file will be updated with the new network
card as eth0.
Lew Berry, MCSE, MCT, CSSA
LCB Consulting Inc.
Systems Engineer
450-106 State Road 13 N, #205
St Johns FL, 32259
[email protected]
(904) 482-1405
(904) 322-5049 fax
(904) 651-1046 cell
_______________________________________________
Blueonyx mailing list
[email protected]
http://mail.blueonyx.it/mailman/listinfo/blueonyx
