Hi, One of our hospitals is intending to build an Endoscopy Reprocessing Rooms of one of the theatres the theatre is Cardiac Protected. The consultant says that the Endo Room will need to be Cardiac Protected.
Outlined in As/NZ 3003:2011 point 4.4.2.4.1 would indicate that this room should be connected to the EP junction in the theatre. What is the requirement for this Endo Room? Is it possible to mark each outlet not to be used for medical devices, have outlets with round pins so that a normal 10 A plug won't fit. If this was done, can it then be wired to AS 3000 with 30mA RCD in the board? What have other hospitals done in a similar situation? Regards, John John Porter Team Leader Engineering Services Building & Engineering Launceston General Hospital Mob: 0419146979 Ph: 03 67776433 Fx: 03 6348 7430 Email: john.por...@ths.tas.gov.au<mailto:john.por...@ths.tas.gov.au> ________________________________ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission. _______________________________________________ bmelist mailing list bmelist@bme.asn.au http://lists.bme.asn.au/mailman/listinfo/bmelist
