--- Aryan Ameri <[EMAIL PROTECTED]> wrote: > Hi there: > > Patching 2.4.20 with acpi? IIRC the acpi patch was > merged in to 2.4.23, > or 2.4.22. Don't remember which one, but I am > running 2.4.23 with ACPI > enabled, and it's working like a charm. Try 2.4.24, > it should have acpi > support. Or better is to run 2.6.1, because acpi > support in 2.6 is much > better than 2.4 > > Theoricaly you should be able to patch your 2.4.20 > with acpi, but > adimtedly I didn't read your email fully to see what > is making the > problem in your case.
Oh please do! > However, is there any reason > that you are running > 2.4.20? (Ruuning Libranet?) it's a pretty old kernel > now with many > known security holes. I'm running a RH9 at this moment. and I'm planning to upgrade after the exams but would like to have an acpi supported kernel temporarily. > > CHeers > > > On Sunday 11 January 2004 13:14, ocean wrote: > > Hi > > I've been patching my kernel with acpi support for > > laptop and have succeeded except in one thing: > Loading > > ACPI related modules automatically at startup(ac.o > > button.o fan.o battery.o processor.o) though I can > > probe them using /sbin/modprobe ac... > > Kernel version 2.4.20-8acpi > > I googled around but in vain. Confed modules.conf > > adding probeall and aliases but in vain.(the > system > > hung at starting atd:. > > Someone pointed out something about adding a few > lines > > an rc.d file but wasn't reliable so didn't try it! > > Conf of rc.sysinit seems hard. > > What conf or init files should I manipulate to get > > them loaded at system's initiallization? > > I have the so-called modules in > > /usr/src/linux-2.4.20-8/drivers/acpi/ac.o > > /usr/src/linux-2.4.20-8/drivers/acpi/.ac.o.flags > > .. > > /lib/modules/2.4.20-8acpi/kernel/drivers/acpi/ac.o > > .. > > output of /sbin/lsmod after manual probe > > > > ppp_deflate 4504 0 (autoclean) > > zlib_deflate 21400 0 (autoclean) > > [ppp_deflate] > > ppp_async 9440 0 (autoclean) > > ppp_generic 24444 0 (autoclean) > > [ppp_deflate ppp_async] > > slhc 6756 0 (autoclean) > > [ppp_generic] > > hsfmc97ali 46308 0 (autoclean) > > hsfserial 33064 0 (autoclean) > > [hsfmc97ali] > > hsfengine 1194048 0 (autoclean) > > [hsfserial] > > hsfosspec 53792 2 (autoclean) > > [hsfmc97ali hsfserial hsfengine] > > hsfsoar 51240 0 (autoclean) > > [hsfmc97ali] > > battery 7936 0 (unused) > > fan 2816 0 (unused) > > button 3788 0 (unused) > > ac 3104 0 (unused) > > thermal 9856 0 (unused) > > processor 12440 0 [thermal] > > udf 98400 0 (autoclean) > > sr_mod 18168 2 (autoclean) > > trident 33652 2 (autoclean) > > ac97_codec 13640 0 (autoclean) > [trident] > > pcigame 2952 0 (autoclean) > [trident] > > gameport 3364 0 (autoclean) > [pcigame] > > soundcore 6404 2 (autoclean) > [trident] > > autofs 13268 0 (autoclean) > (unused) > > natsemi 19552 1 > > ipt_REJECT 3928 6 (autoclean) > > iptable_filter 2412 1 (autoclean) > > ip_tables 15096 2 [ipt_REJECT > > iptable_filter] > > ide-scsi 12208 1 > > scsi_mod 107160 2 [sr_mod ide-scsi] > > ide-cd 35676 0 > > cdrom 33728 0 [sr_mod ide-cd] > > keybdev 2976 0 (unused) > > mousedev 5492 1 > > input 5888 0 [keybdev > mousedev] > > hid 11768 0 (unused) > > usb-uhci 26316 0 (unused) > > ehci-hcd 19976 0 (unused) > > usbcore 78816 1 [hid usb-uhci > > ehci-hcd] > > ext3 70784 4 > > jbd 51892 4 [ext3] > > > > output of /etc/modules.conf > > > > alias eth0 natsemi > > alias usb-controller ehci-hcd > > alias usb-controller1 usb-uhci > > alias ieee1394-controller ohci1394 > > alias sound-slot-0 trident > > post-install sound-slot-0 /bin/aumix-minimal -f > > /etc/.aumixrc -L >/dev/null 2>&1 || : > > pre-remove sound-slot-0 /bin/aumix-minimal -f > > /etc/.aumixrc -S >/dev/null 2>&1 || : > > alias /dev/ttySHSF[0-9]* /dev/ttySHSF > > alias /dev/modem /dev/ttySHSF > > alias char-major-240 /dev/ttySHSF > > alias /dev/cuaHSF[0-9]* /dev/ttySHSF > > alias char-major-241 /dev/ttySHSF > > options hsfserial serialmajor=240 calloutmajor=241 > > alias char-major-242 hsfosspec > > alias /dev/hsfdiag hsfosspec > > alias /dev/hsfdiag* /dev/hsfdiag > > alias char-major-243 /dev/hsfdiag > > > > options hsfosspec dcpmajor=242 diagmajor=243 > > probeall /dev/ttySHSF hsfpcibasic2 hsfmc97ich > > hsfmc97via hsfmc97ali > > probeall hsfserial hsfpcibasic2 hsfmc97ich > hsfmc97via > > hsfmc97ali > > > > besides I have to run klaptopdeamon. > > I have acpid run automatically. > > /sbin/depmod spits out know errors. > > There's another warning I get at boot : > > i8253 count too high > > > > output of dmesg|grep ACPI > > BIOS-e820: 000000001bf70000 - 000000001bf7c000 > (ACPI > > data) > > BIOS-e820: 000000001bf7c000 - 000000001bf80000 > (ACPI > > NVS) > > ACPI: have wakeup address 0xc0001000 > > ACPI: RSDP (v000 PTLTD ) @ > > 0x000f6c80 > > ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ > > 0x1bf752a8 > > ACPI: FADT (v001 ATI Salmon 01540.00000) @ > > 0x1bf7bf64 > > ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ > > 0x1bf7bfd8 > > ACPI: DSDT (v001 ATI MS2_1535 01540.00000) @ > > 0x00000000 > > ACPI: BIOS passes blacklist > > ACPI: Subsystem revision 20021212 > > ACPI-0263: *** Info: GPE Block0 defined as > GPE0 to > > GPE63 > > ACPI: Interpreter enabled > > ACPI: Using PIC for interrupt routing > > ACPI: System [ACPI] (supports S0 S3 S4 S5) > > ACPI: PCI Root Bridge [PCI0] (00:00) > > ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0._PRT] > > ACPI: PCI Interrupt Routing Table > > [\_SB_.PCI0.AGPB._PRT] > > ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10, > disabled) > > ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10) > > ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10) > > ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10) > > ACPI: PCI Interrupt Link [LNK4] (IRQs 7 10, > disabled) > > ACPI: PCI Interrupt Link [LNK5] (IRQs 7 *11) > > ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10, > disabled) > > ACPI: PCI Interrupt Link [LNK7] (IRQs *5) > > ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10, > disabled) > > ACPI: Embedded Controller [EC0] (gpe 24) > > ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 > > ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10 > > ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10 > > ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 10 > > PCI: No IRQ known for interrupt pin A of device > > 00:10.0<6>PCI: Using ACPI for IRQ routing > > ACPI: Processor [CPU0] (supports C1 C2, 2 > performance > > states) > > ACPI: Thermal Zone [THRM] (27 C) > > ACPI: AC Adapter [ACAD] (on-line) > > ACPI: Power Button (FF) [PWRF] > === message truncated === __________________________________ Do you Yahoo!? Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus _______________________________________________ bna-linuxiran mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/bna-linuxiran
