Hi Bob,
The sticky/jumpy tuning is probably due to some lubricant on the
brass tuning flywheel and it's small "wheel", and maybe the edge of the
dial it rides on. Have him clean those well with alcohol, also lube,
very sparingly, the bushings for the various shafts in the mechanism, as
well as the end bearings on the tuning capacitor. Those brass wheels
must be scrupulously clean to avoid slipping.
Has this rcvr ever been re-capped? What is the ser. no.? If not,
and s/n is below about 17,500 it will be full (more than 50) of BBOD's,
and that could be part of the sensitivity problem.
Is this rcvr new to him? Does he know its' history, at least for
the last few yrs, and what work has been done to it? He can get some
more hints, etc., from the "SP-600" page on <www.boatanchors.org> - link
found near the top of the home page.
73,
Al, W8UT
www.boatanchors.org
www.hammarlund.info
"There is nothing -- absolutely nothing -- half so much
worth doing as simply messing about in boats"
Ratty, to Mole
_______________________________________________
Boatanchors mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/boatanchors
