I used a mixture of Marvel Mystery Oil and Acetone (about 60%-40% as I
recall) plus some heat. The acetone wicks into the shaft and takes the
oil with it. That softens caked on grease and oil.
Good luck.
Jim Pruitt
WA7DUY
On 9/25/2017 9:50 PM, Steve Mulder wrote:
I got it moving using rubbing alcohol on a Q-tip and a little bit of
heat from a light bulb.
Thanks again for all the help!
Steve
_______________________________________________
Boatanchors mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/boatanchors
