Hello All, This one is beyond my ken.
Refer to the drawing found here: https://www.dropbox.com/s/mm2ufyew8sy7x72/Screenshot%202022-05-23%207.02.30%20PM.png?dl=0 [https://www.dropbox.com/temp_thumb_from_token/s/mm2ufyew8sy7x72?preserve_transparency=False&size=1200x1200&size_mode=4]<https://www.dropbox.com/s/mm2ufyew8sy7x72/Screenshot%202022-05-23%207.02.30%20PM.png?dl=0> Screenshot 2022-05-23 7.02.30 PM.png<https://www.dropbox.com/s/mm2ufyew8sy7x72/Screenshot%202022-05-23%207.02.30%20PM.png?dl=0> Shared with Dropbox www.dropbox.com Here is his question, copied directly from his email: Will this current mockup work (theoretically), or would I have to ground grid 1 and insert a filament choke, etc. to use a pi output network? Thanks in advance. Best Regards, William p.s. Yes, I will add him to the Boatanchor list... 🙂 _______________________________________________ Boatanchors mailing list [email protected] https://puck.nether.net/mailman/listinfo/boatanchors
